Cell Mill Machine for Seaweed

Many friends who want to produce industrialized must be unfamiliar with Cell Mill Machine for Seaweed. Cell Mill Machine for Seaweed has a very convenient, crushing speed, crushing product quality, etc. is a very useful pulverizer. .

The main performance characteristics of the pulverizer:

1, the airflow pulverizer includes a vertical pulverizer. The size of the product can be adjusted between D97: 8 and 150 microns, with a good particle shape and a narrow particle size distribution. It can be used in series with a multi-stage crusher and produces a product having multiple particles.
2, the airflow pulverizer is easy to disassemble, the inner wall is smooth, no dead angle. The whole system is closed, the dust is small, low noise, and the production process is clean and environmentally friendly.
3, the airflow pulverizer control system adopts program control, easy to operate.
ALPA Carbon Cell Mill Machine for Seaweed Case Sharing: The company produces superfine and super fine pulveruts in the production of static pressure graphite. After multi-party examinations and experiments, finally selected our AlPA as a cooperative customer, we provide the Cell Mill Machine for Seaweed provided to its carbon pulverized particle size, particle size range, yield and other needs.
Technical parameters:
finished particle size: D65: 200 目
Production capacity: 800-1000kg

Cell Mill Machine for Seaweed Job Safety Application Basic Requirements
1, Crush When the machine operation, the operator should stand in the tangent direction of the hammer rotation, and if you don't wear your gloves, your hand must exceed the security line, not allowing iron and sticks instead of hand feed.
2, pulverizer and power unit should be installed firmly. If the equipment is fixed for a long time, it should be fixed on the cement; if the device is a mobile operation, the unit should be installed on the base made of angle iron, and ensure that the belt wheel groove of the power machine (diesel or electric motor) and the equipment is in the same Rotary plane.
At the same time, check if the leather belt looseness is appropriate.

5, noTo replace the pulley, the puller is high to cause explosion, or the speed is too low to affect the working efficiency of the pulverizer.
6. After the pulverizer starts, it should be idled by 2 to 3 minutes, no abnormal phenomenon, then press the work.
7. At any time, pay attention to the operation of the equipment, the feeding should be uniform, to prevent blocking bullies, do not have a long time overload.If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
8. When blocking occurs, it should be stopped immediately. It is strictly forbidden to use a wooden stick or hand to feed or pull out the feed to avoid the pulverizer to wound the arm or damage the machine.
9. If you crush a hard raw material, the operator must wear glasses.
10, the workplace should have a ventilator and strictly prohibit fireworks to prevent dust explosion from fire.


Today, the knowledge of Cell Mill Machine for Seaweed, I will introduce you to here. If you want to learn more, please continue to pay attention to our website.