Vibration Mill Machine with ammonium chloride

Vibration Mill Machine With ammonium chloride's balance performance, only need to be produced in a smooth floor, and low noise, which can avoid dust leakage during the pulverization process, favored by the powder industry.

Vibration Mill Machine With ammonium chloride is affected by many industries, but it also has some shortcomings.

During the purchase, the manufacturing cost of Vibration Mill Machine With ammonium chloride is high, the energy consumption is high, and the post-processing cost is also high; the product particle size is difficult to achieve submicron grade, and the output is substantially reduced during 10 μm or less. Processing cost Dramatic increase.

However, the application of Vibration Mill Machine with ammonium chloride is really a wide range of:

1, non-metallic mine

Typical materials are: hard kaolin, talc, Graphite, square algorite, gypsum, diatomaceous earth, silicahydrate, heavy crystal stone, leaf wax, aluminum hydroxide, etc., ultrafine pulverized, cerium oxide, cerium oxide, etc.
2, thermal materials

Typical materials include lactose, wax, resin, fat, bone powder, plants, etc .;

3, hyperparation processing of Chinese herbal medicine and raw materials [123
Typical materials include pollen, hawthorn, mushrooms, pearl powder, stomach medicine, Nimoda, antibiotics, Ganoderma lucidum, five times, He Shouwu, wearing heart, mint, houttuynia, fern root, puerargen, slate blue root, etc.


ALPA Rocks Vibration Mill Machine With ammonium chloride case share: This customer is a large-scale comprehensive group company specializing in the mining, powder processing and sales of heavy crystalline mines, before The customer is from foreign imported crystal stone crushing equipment. Later, by understanding, knowing the ultrafine pulverization equipment of our ALPA Co., Ltd., in terms of performance, in terms of foreign devices, far exceeding the same type of equipment, far exceeded the same type of equipment. Finally, after many exams, we purchased the Vibration Mill Machine with ammonium chloride from our company.
Technical parameters:

Production capacity: 1.2-1.5T

Vibration Mill MachiThe operation process of neorrow ammonium chloride is important. You need to pay attention to the following points:
1, check all the lines, electrical components, etc. of the pulverizer, whether it works fine. Whether the machine is grounded, so that the housing is powered by electric shock. Whether the machine spindle has a card death, if it should be handled in time. Whether the machine has an abnormal situation during operation, if there is a stop check.

3, after the offset is running, it can begin to start the feed. The pulverizer should stop the feed before stopping. Wait until the machine is completely discharged, it can be stopped.
4, the feed should be uniform, not over, so as not to increase the burden on the machine. The pulverizer cannot be cleaned, maintenance, etc. during operation.


Shandong AlPa is a source manufacturer specializing in Vibration Mill Machine With Ammonium Chloride. All the year round provides equipment for domestic and foreign customers. Welcome to inquire!