Pin Crusher with Wheat

Pin Crusher With Wheat is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.

Pin Crusher with Wheat in the market Variety is very large, and its crushing quality and level are very different. In general, assessing crushing properties in crushing is expressed in crushing efficiency, pulverizing precision. However, the definition of crushing efficiency and pulverization accuracy has many inconveniences in practical applications. Through the general definitions of the crushing efficiency of the assessment of unity and disadvantage of the assessment of crushing properties.

Alpa Pectin PIN CRUSHER with WHEAT Case Sharing: Yantai Sugar Shares, the company needs to purchase a super-smashing equipment for pulverizing gelatin. Through multi-party investment and incoming experiment, the company finally purchased our Alpa's Pin Crusher With Wheat as its pectin ultrafine pulverized equipment.

Technical parameters:
Finished granularity: 60-200 目
Production capacity: 300kg

Pin Crusher with Wheat Job Safety Application Basic Requirements

1, when crusher The operator should stand in the tangent direction of the hammer rotation, and if you don't wear your gloves, your hand must exceed the security line, not allowing iron and sticks instead of hand feed.
2, pulverizer and power unit should be installed firmly. If the equipment is fixed for a long time, it should be fixed on the cement; if the device is a mobile operation, the unit should be installed on the base made of angle iron, and ensure that the belt wheel groove of the power machine (diesel or electric motor) and the equipment is in the same Rotary plane.
At the same time, check if the leather belt looseness is appropriate.
4 Whether the power machine and the pulverizing machine are lubricated.
5, don't just replace the pulley, prevent the transition chamber to produce explosion, or the speed of the pulverizer is too low.
6. After the pulverizer starts, it should be idled by 2 to 3 minutes, no abnormal phenomenon, then press the work.
7. At any time, pay attention to the operation of the equipment, the feeding should be uniform, to prevent blocking bullies, do not have a long time overload. If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
8. When blocking occurs, it should be stopped immediately. It is strictly forbidden to use a wooden stick or hand to feed.Or pull out the feed to be processed to avoid the pulverizer to get the arm or damage the machine.
9. If you crush a hard raw material, the operator must wear glasses.
10, the workplace should have a ventilator and strictly prohibit fireworks to prevent dust explosion from fire.

Users need to purchase airflow mill, air flow mill, ultrafine pulverizer, eddy current pulverizer, medical gas flow crusher, ultrafine pulverizer, cone mixer, Chinese medicine pulverizer and other products cancontact us.