Cell Grinder with ammonium chloride

In many grinding manner, Cell grinder with Ammonium Chloride processed products with a small particle size, narrow particle size distribution, high purity, high active particles, good dispersion characteristics, has become one of the most mainstream grinding technology, in particular applicable to not allow contaminated material crushed medicines.

Cell grinder with Ammonium Chloride using a plurality of nozzles arranged opposite a high velocity air stream, the purpose of superfine pulverization. The crushed material enters the pulverizing chamber with the rising air flow, since the pulverized rotor is high-speed rotation, the particles are subjected to the centrifugal force generated by the pulverized rotor, and the center of heart is generated by the viscous action of the gas flow. When the centrifugal force of the particles is greater than the heart force, that is, the pulverized particle size The coarse particles return to the pulverizing chamber to continue the impact, fine particles flow into the cyclone separator, collectors, and the gas is discharged from the air.

Low temperature without media, ensuring high purity and physical properties of the product. The equipment runs no dust pollution in a negative pressure state. The full use of jet flow can increase the pulverization efficiency of 30% compared to conventional gas flow grinding machines, and the precision is higher.

ALPA equipment is small, and the structure of the pulverizer can be highly machined so fine powder, avoiding the wear of the horizontal crusher pulverized part, and the equipment of the equipment is used under the same material. Multiplier. Small granularity is wide, and the product particle size can be arbitrarily adjusted within 1-74um.

alpa aluminate Cell grinder with Ammonium Chloride Case Study: The company found that the domestic ultrafine grinding equipment, have been tied in the performance of similar foreign companies. And the price is more advantageous than foreign similar import companies. Finally, buy our Cell grinder with Ammonium Chloride as production equipment.
Technical parameters:
The product size: D97: 20μm
capacity: 100KG

any kind of mechanical device, before use have certain precautions must be checked Note, when in order to operate, the failure rate to a minimum, so Cell grinder with Ammonium Chloride what precautions to take before using?
1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
2, lubrication should be carried out in accordance with the requirements to make the machine operating properly.
3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.
4, foreign matter should not be treated in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss. 6, if damaged should immediatelyReplacement, certain components should be checked regularly.

Today, Cell Grinder With ammonium chloride is introduced here. If you want to know more, please continue to pay attention to our website.