Impact Grinder with Iron Oxide RED

With the continuous development of pulverizer technology, Impact Grinder with Iron Oxide Red has gradually penetrated into everyday life.

ALPA Soybean Impact Grinder with Iron Oxide Red Case Sharing: The customer is a company in the Netherlands. The company needs ultrafine pulverization to soybean meal (after oily oil). Investigating European equipment manufacturers, integrating, or our ALPA equipment is better than the performance ratio, or from cost performance. Through the incoming experiment, the company chose our company's Impact Grinder with Iron Oxide Red.

Impact Grinder with Iron Oxide RED Cry Wheel, it is necessary to clean up in time

Impact Grinder with Iron Oxide Red has been exchanged into an industrial manufacturing field, as a Common production equipment is not only the advantage, and sometimes Impact Grinder with Iron Oxide Red will also be damaged. Let's take a look at how to check the repair equipment.

Daily maintenance Impact Grinder with Iron Oxide Red To check the power outlet, plug, power cord is no oxygen, break, if you do not have a power test machine, when the motor is not rotated, When the handlight movement is rotatable, it can be concluded that there is a capacity failure in the two start capacitances of the machine. If you can make a discharge spark and a very frightening, the capacitor can be used; if the sparks and sound are weak, the capacity of the capacitance has decreased, and the new or add a small capacitor. The airflow pulverizer does not use this method if the capacitor has damaged the short circuit, and it must be replaced with the same size new product.

There is also a product of Impact Grinder with Iron Oxide Red, which is a rod mill, which is very good, and the daily maintenance is more important. Below is this Maintenance focus of the gas current pulverizer. Check if the lubrication of the bearing is good to check if all fasteners are tight. Check if the drive belt is installed correctlyAnd the situation is good, if the belt breakage should be replaced in time, when there is oil in the belt or the groove, the application clean rag is cleaned in time.Check if the protective device is good. If the protective device is found, it should be excluded in time.Check that there is no material or other debris in the damage chamber, if it is sometimes cleaned.Check if the hydraulic starting machine head or the starting roof rod is returned, the adjustment space is installed correctly and compact.

The above is the knowledge of the product daily maintenance and maintenance.

Shan dong alpa mainly engaged in the production and development and service of Impact Grinder with Iron Oxide Red product technology, welcome to consult.With good quality and service, affordable prices, customer-oriented attitudes provide airflow crushing products and services.