Impact Grinder with Refractory Clay ORE

Impact Grinder with Refractory Clay ORE ORE can be said to be important in the current stage of industrial production, AlPA has been committed to the research and development and application of grades for many years, and we have produced during many years of development. The classifier has gradually begun to develop in the direction of modernization, and we believe that we can provide a complete set of production planning programs in a large range.

Under the action of the high-speed rotary impeller, the gas pressure flowing through the impeller increases, and the high pressure airflow flows out of the impeller, the fine particles are ejected. Since the blade of the rotary vane is designed as a bending, the inlet is large, the exit cross-sectional area is small, so the airflow pressure at the outlet is reduced, the speed increases, and the rotational flow is conducive to classification.
The grading point adjustment mechanism sets three adjustment rods and keeps its synchronous motion using the chain. When the adjustment rod moves up, the fine powder increases; when the adjustment rod moves down, the fine powder is reduced. The graded point can be continuously adjusted, and the granularity of the Impact Grinder with Refractory Clay ORE can be adjusted. The granular weight of the grading weight can reach D97 ≤ 3 ≤ 150 microns, which is suitable for fine grading of dry micrometer products.
The setting of the control ring is to ensure that the control ring is formed between the control ring and the radial particles ring, and the stability of the airflow flow is controlled. The residual windlet inevitably introduces excess gas from the dry material, the temperature of the classification chamber is high, and the air can expand, and therefore designed a residual tightening to maintain the stability and balance of the graded indoor airflow.


ALPA Phenolic Resin Impact Grinder with Refractory Clay OOR Case Sharing: The company has a manufacturer of phenolic resin in its customers, and the company has found a lot of powder equipment companies. There is no suitable device. Finally, we find our AlPa, after the experiment, our company's product Impact Grinder with refractory Clay Ore.
Technical parameters:
Finished particle size: D50 less than 5 μm

Impact Grinder with refractory Clay Oore will generate certain noise during production. The main reason for generating noise is:
(1) When the coal mill is running, the operating component drives air to generate a \"whistle\" call:
(2) When the device is running. VibrationThe sound; (3), the rubbing or the friction between the hammer and the drug; the rotating part itself is friction.

For the cause of noise, the main solution is as follows:
(1) adding oil to each rotating member, if the bearing and the axis are misalign, adjust the bearing wear, replace the bearing;
(2) The heat generated during the breaking process also produces noise, and cools the cooling of the crushing chamber, the muffler is mounted in the air intake port of the pulverizer; (3) damping the damping pad and other devices.

Different models of milling machine performance, different granularity, different production efficiency, different production and production environment, the price of processing equipment is also different, customers can ask AlPA engineers to purchase appropriateModel and specification, welcome to inquire.