2022-01-10 11:42:39
Ring Roller Pulverizer with APIs is an industrial equipment. With the development of society and the needs of people's lives, the industrial community is increasingly demanding various fine powder, and the requirements, purity and pass rate requirements are also It is increasingly high, and the application of classification machine is also more extensive.
High-speed jet enters the crushing chamber, collides with particles, multiple times in the friction of high pressure air, shear and pulverized, pulverized materials, and the assembly of rising airflow motion, under the action of the fan, In the Ring Roller Pulverizer WITH API's powerful centrifugal force, the thickness of the material is separated from the separation, the fine particle size of the pulverized wheel into the cyclone separator and dust removal, continues to be pulverized.
The pulverizer produced by AlPa can perform local internal changes depending on the different characteristics of the material, so that it is more suitable for the pulverization requirements of the material. The crusher has a greater amount of treatment, energy saving, simple operation, and low maintenance costs.
ALPA Battery Material Ring Roller Pulverizer WITH APIS Share: Shandong Yantai Chemical Material Company, in 2020, from our company, from our company, Ring Roller Pulverizer with APIs. Technical parameters Product particle size: D50: 8-12UM production capacity: 50kg / h
Ring Roller Pulverizer WITH APIS daily maintenance
1, during production, the temperature rise of the bearing must be checked, when heaven When more than 50 ° C, the check is stopped, and the reason is to rule out the fault.
2, when the new machine is running, the drive belt is easy to elongate, and should pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt.
3, if the loss case should be checked frequently, replace the quality and production volume in time.
4, the blade, the bushing should often check the wear situation. If the wear is worn, the productivity is lowered, and the particle size is replaced after the particle size is replaced.
5, the host and the graded flow bearing are lipids, and the No. 2 special lipids are used 265-295.
6, the replacement period of the bearing is 2000 hours, and the amount of the grease is filling the amount of the space in the bearing cavity (episode) or 3/4 (lower test) cut, not too much to fill the grease, otherwise The bearing temperature is too high.
7. The spiral feeder has been changed during the change of the lipid of 4,000 hours, and the calcium-based grease is added.
The above is the use of Ring Roller Pulverizer with APIs, you want to know other crushersI can pay more attention to us!
