Rod Pin Grinder with aluminium oxide

In the classification operation of the industrial production at this stage, the use of Rod Pin Grinder With Aluminium Oxide is mainly for the effective smash of solid particles, and it is also a commonly used comminution equipment in the ultrafine pulverization process. .

High-temperature Rod Pin Grinder with Aluminum Oxide performance characteristics:
1, the content classification device, the product particle size D97: 8-150 microns can be adjusted, the particle shape is good, the particle size distribution is narrow.
2, can be used in series with the classification machine, and produce a plurality of particle size sections 1 time.
3, equipment disassembly and packing is convenient, and the inner wall is smooth and no dead angle.
4, the whole system is closed, the dust is small, the noise is low, and the production process is clean and environmentally friendly.
5, the control system uses program control and easy to operate.

ALPA Carbon ROD PIN GRINDER WITH Aluminum Oxide case share: The company needs to super finely pulverized carbon during the production of static pressure graphite. After multi-party investigation and experiment, finally selected our AlPA as a cooperative customer, we offer the Rod Pin Grinder With Aluminium Oxide provided by it to its need for carbon pulverity, particle size, yield and other needs.

Technical parameters:
Finished granularity: D65: 200 目
Production capacity: 800-1000kg

Rod Pin Grinder with aluminium oxide motor conservation measures

1, check Whether the lubrication of the bearing is good

2, check if all fasteners of the pulverizer are tight.
3, check whether the transmission belt is installed correctly and the situation is good. If the belt breakage should be replaced in time, when there is oil in the belt or the groove, apply a clean rag to clean.
4. Check if the protective device of the crusher is good. If the protective device is found to be abnormal, it should be excluded in time.
5. Check that there is an absence of material or other debris in the damage chamber. If it is sometimes handled in time.
6, check whether the hydraulic starting machine head or the starting rod is returned, and the gasket is adjusted to be properly and compressed.

As a three-year powder engineering equipment manufacturer, Shandong Alpa has more than 3,000 customers at home and abroad, and the rich research and development experience has always led to the front end of the industry, so before consulting, you need to provide Characteristic information of pulverized materials, enter granular parameters, production yield range, purity requirements, specific process requirements (anti-high temperature, explosion-proof, dust pollution, etc.),Industrial engineers provide appropriate equipment models or system solutions according to this information.Welcome to inquire.