Rotor Grinder with CEMENT ADDITIVE

With the continuous increase in social needs, Rotor Grinder with CEMENT ADDITIVE continues to improve in the use of performance, finished product quality, service life, etc., very good, processed raw materials into microtes and even nanoscale fine powder, and has also been chemical , Food, pesticides, cosmetics, dyes, coatings, electrons, etc. have been widely used.

With the increasing social demand, Rotor Grinder with CEMENT ADDITIVE is facing huge challenges. Therefore, ALPA Technology Co., Ltd. persisted, continuously improved the ultrafine pulverization strength, particle size distribution, particle crystal form, etc. to achieve more production.
ALPA, strive to achieve low energy consumption, high yield, non-pollution in ultrafine pulverizer, to achieve good particle size, dispersion, unique and potential performance, improve powder crusher competitiveness, and realize the environment Protection and low power performance.
ALPA Aluminate Rotor Grinder with CEMENT Additive Case Sharing: The company discovered that domestic ultrafine pulverized equipment, which has been flattened with similar companies in foreign countries. And the price is more advantageous than foreign similar import companies. Finally, our Rotor Grinder with CEMENT Additive as a production equipment.

Finished particle size: D97: 20μm
Production capacity: 100kg

In the production process, we should pay attention to maintenance and maintenance of Rotor Grinder with CEMENT ADDITIVE.
1. In the production process, the bearing temperature should be checked regularly. When the temperature rises above 50 degrees Celsius, the machine should be stopped to find the cause and troubleshoot.

3, which should be regularly inspected, replace it in time, ensuring production quality and production.
4, the wear of the blade and lining should be checked regularly. If the productivity is lowered after the wear, the grain size is thicker and the wear is immediately replaced.
5, the host and the hierarchical flow bearing use grease lubrication.

6, the replacement period of the bearing is 2000 hours, the amount of the grease is 1/2 or 3/4 of the bearing cavity space. (Lower test) The temperature of the bearing will be too high.
7, the spiral feeder changes the fat period of 4,000 hours, plus ordinary calcium based grease.

8, in the output shaft E, the pulley e, avoiding heavy hammer impact, damaging parts.
9. It is strictly forbidden to turn the handle of the handwheel in the stop.
10, the lubricator used by the governor adopts N32 alkaline high-zinc high anti-milling oil, and the reducer uses 401 universal lubricants and cannot be replaced by other machines.
11. After 3000 hours, the new oil should be replaced, and then used after 500 hours of oil for the second change, then use it after 1000 hours.

For friends who want to know other crusher industry knowledge can also log in to the website.If you are interested in our Rotor Grinder With CEMENT Additive, please feel free to contact us.