Turbo Mill Machine with Natural / Artificial Fiber

Turbo Mill Machine with Natural / Artificial Fiber The main applicable pulverization mechanism determines its scope of application, high finished product and high application, widely used in chemical, minerals, metallurgy, abrasives, ceramics, refractories, medicine, pesticides, Food, health products, new materials and other industries.

When Turbo Mill Machine With Natural / Artificial Fiber sieve material, the screen has good uniformity under the air pressure of the rotating duct. At the same time, under the gravity of the air blower, the screen collects the qualified material, and automatically discharges the material in the front cavity of the valve body by the unloading valve. The raw material powder driven by the compressed air is continuously supplied to the pulverizer without a rotating member. By accurate control of the airflow into three products: F fine powder, m powder and G coarse powder, and collected in subsequent cyclone dust collectors and dust collectors.
The material is driven by the blower of the airflow pulverizer. The lower end of the pulverizer is moved upward to the pulverization region, the strongest, and the strongest effluent is separated under a high speed rotary pulverized turbine. The fine particles that meet the particle size requirements are entered into the cyclone or dust collector by the gap of the pulverized wheel blade. After collecting, some of the thick particles of the fine particles disappear and drops along the cylinder wall to two air ports. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles fall to the discharge exit.

AlPa Aluminum Silicate Turbo Mill Machine With Natural / Artificial Fiber Experiment: A environmental protection technology company needs to grade aluminum superficition of aluminum silicate due to production demand, because uncertain demand can not be achieved, so feed Experiments, by experimenting our ALPA air grade machine equipment, the aluminum silicate ultrafine powder provided by the company can be classified, and finally the product particle size obtained by the experiment: D90: 18.3 μm, yield: 460kg / h Add the amount.

Welcome all major powder grading needs manufacturers, visit the factory, incoming experiments.

Any mechanical equipment, there must be a certain precaution before use, and must check the precautions to operate, so that the damage rate is minimized, so Turbo Mill Machine With Natural / Artificial Fiber is in use What preventive measures are taken before?

1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
2, lubrication should be carried out in accordance with the requirements to make the machine operating properly.
3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.
4, foreign matter should not be treated in time to avoid damage to the tool.
5, when using the crusher, if there isAbnormal, should be handled immediately to avoid large loss.6. If damage should be replaced immediately, certain components should be checked.

If you have the situation about other crushers, you want to know, welcome to consult!