Superfine Rotor Mills Pulverizer Machine

The people currently used in daily life are also more, the airflow pulverizer is smashed into the standard size, which is generally smashed into micrometers, usually our equipment is more The device is constructed, usually composed of a portion of a coarse, fine powder or a wind device, or the like. The main purpose is to use wind energy to be powdered, and have canceled the traditional screening at the time of use. The main application is more useful in many industries such as mining or building materials. Some industries such as metallurgical or building materials, chemicals, etc. are useful to use large crushers for work.

The following is a detailed description:

1. Feeding granularity control

Most superfine rotor mill Mills Pulverizer Machine has a certain upper limit request for the feed particle size. After entering the pulverization cavity, it can be sufficiently accelerated before collision and crushing with other particles. It is difficult to completely accelerate after large particles enter the pulverized cavity, which will allow them to stay in the machine too long, resulting in too high energy consumption. Therefore, in large-scale production of ultrafine powder, it is an effective way to pre-ground the raw material of the particle size is an effective pathway for energy saving.
2. Working medium

Currently, the working medium of Superfine Rotor Mills Pulverizer Machine is mainly compressed air, superheated steam, inert gas, and the like. The choice of working fluid has a certain impact on crushing effects and economics. Superheated steam is superior to air in fluidity and critical flow rates to achieve higher flow rates and uniform flow fields. However, using superheated steam as a working fluid, it must be ensured that it is still in an overheating state before entering the product capture device, otherwise the material is condensed.
3. Feeding speed

Feeding speed is an important parameter reflecting gas flow grinding production capacity. During the pulverization process, the optimum ratio of the intake flow rate and the feed speed is the key to improving the crushing efficiency. In general, under certain intake flow conditions, the feed speed is proportional to the particle size of the product. However, the feeding speed is too fast, which will increase the particle density, mutual interference, disadvantage of the particles, and difficult to achieve the sufficient and effective collision between particles, affect the crushing effect; although the feed speed is too slow, the particles stay in the crush area The time can be extended, which will reduce the particle density, reduce the collision rate, resulting in a decrease in production capacity and an increase in unit production energy consumption.
4. Particle size

Superfine Rotor MIn the pulverization process, ILLS Pulverizer Machine has increased the uniformity and strength of the material as the material particle size is reduced.After reaching a certain degree, the particle size of the material is no longer reduced or reduced, that is, the crushing limit of the material is reached.At this time, the material specific surface area increases, the surface activity of the particles, the particle agglomeration and grinding are in a dynamic equilibrium state, even if the grinding time is prolonged, it is difficult to further reduce the particle size of the material.


Alpa Graphite Superfine Rotor Mills Pulverizer Machine Case Sharing: This customer is a research institution, in its research, the graphite needs to be superfined.Through multiple incoming experiments, we finally chose our AlPa's Superfine Rotor Mills Pulverizer Machine.
Technical parameters:
Finished particle size: D50: 10-30μm
Production capacity: 30-50kg

Please pay attention to Shan Dong Alpa, the company mainly has gas flowMachine, airflow mill, pharmaceutical airflow pulverizer, disc air pulverizer, eddy current pulverizer.