2021-11-08 09:19:10
With the continuous advancement of pulverizer technology, Fine Powder Turbo Mills Design has been familiar with people. The most popular crushing equipment is now Fine Powder Turbo Mills Design. It has a wide variety, available for laboratory, home and factory use. It has a wide range of production, high energy consumption, high automation, and high classification quality.
A Fine Powder Turbo Mills Design costs, if you want to use Fine Powder Turbo Mills Design for a long time, please pay attention to the following:
1. During the production process, Temperature rises in the bearing frequently, when the temperature rise exceeds 50 ° C, the examination should be stopped, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5. Fine Powder Turbo Mills Design's host and level distribution bearing uses special grease (265-295 degrees) lubrication.
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature It will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.
The above is a 7 point introduction to the daily maintenance of Fine Powder Turbo Mills Design.
ALPA Cassava Starch Fine Powder Turbo Mills Design Case Sharing: This customer is a new panel industry, dedicated to providing professional and excellent plywood new fillers for plywood industry customers. The company needs to be used in the production process of the company. Multi-party examine, finally purchased the CSM1100-V mechanical grinder from our AlPa.
Technical parameters:
finished particle size: 98% over 325 mesh
Production capacity: 2T
