2021-11-12 11:30:59
With the development of the times, the progress of society, the development of the market is elegant, and more and more manufacturing have to accelerate innovation, some transformations, some continue to improve the technical level of the product, to adapt to the development of the market, Meet the customer's picky requirements. In the case of continuous changes in the market, there is only constant innovation, continuously improve your technical level, and constantly improve your own products can make the Turbo Mill of Carbon Nanotubes have a broader development space.
Turbo Mill of Carbon Nanotubes:
Using high pressure airflows to stroke itself, ensure the purity of the material, facing individual hardness, high materials, high hardness ceramic corundum as a crushing The cavity, greatly reducing the wear of the material on the pulverizer to ensure that the purity of the material is low temperature and low temperature, and the inert gas can be pulverized, such as nitrogen, carbon dioxide, is suitable for high activity, flammable and explosive non-metallic mine powder.
High capacity, fast efficiency; compared with other ultra-fine pulverizations of the same capacity, due to the continuous feed of Turbo Mill of Carbon Nanotubes, continuously pulverized, continuously, the characteristics of continuous recovery makes it greatly improved, With the mode of automation control, the advanced level is much higher than other devices.
The structure is simple, the disassembly and cleaning is convenient, there is no need to lubricate oil, etc.
The product is fine, the particle size distribution is uniform, and the grading effect of Turbo Mill of Carbon Nanotubes makes it produced by ultrafine powder fineness and distribution, and then cooperate with Turbo Mill of Carbon Nanotubes. Use more to make the product particle size and distribution far better than the processing of other equipment.
Technical parameters:
finished particle size: 98% over 325 mesh
Production capacity: 2T
1, ask: How to choose equipment in the face of materials that need to be smashed?
A: (1) Moh's hardness is less than 3. The mechanical grinding machine and hierarchical impact mill can meet the crushing requirements, saving a certain cost. (2) High hardness, high purity material is higher than 3.5 hardness. (3) If it is a metal powder, you can atomize the grading and cannot be broken.
2, ask: The custom pulverizer can be used in different materials. What is the difference between them?
A: (1) After the food and drug is crushing, it is necessary to meet the level of food safety, the best choice for stainless steel materials, because the mirror is polished inside and outside, does not produce iron pollution. (2) Broken material is easy to worn, and the purity is required to be high after crushing, and the stainless steel is optimal. (3) If the crushing requirements are not high, cost savings, the air pulverizer of carbon steel material can be used.
3, ask: When using a gas flow crusher, the fineness of the finished product does not reach the standard, how to adjust the classification wheel is not used?
A: (1) If the new custom pulverizer does not meet the requirements of the granularity, the device can be incorrect.
Therefore, in order to avoid such errors, it is best to perform material crushing and grading experiments before purchase, and carefully check whether the experimental results are satisfactory.
Shan dong alpa produces various types of crushers, can be used in various materials such as medicinal materials, ingredients, chemicals in powder, and the highest effect can reach. Our products are non-standardized products, which will customize their products according to your needs, and make a reasonable offer according to the product.
Previous: Impact Mill of Onion Particles
