Turbo Grinder for Cinder

Turbo Grinder for Cinder is a crushed device commonly used in industrial production. Due to its excellent performance, it is widely used in the crushing operations of various materials. Although the efficiency of this work is very prominent, we still have to look at the machine, just like a normal machine, check the machine, eliminate the machine failure, make the machine more efficient and safely.

Turbo Grinder for Cinder is smashed in full-closed state, and the fineness of the pulverized particles is better, the granular shape is good, the output is also large, the pulverization process is no dust, and the material is purified by the purity after crushing. . Turbo Grinder for Cinder In the pulverization process, Turbo Grinder can reach the effect of cell breakage, so that the effective component dissolution of the medicinal material is greatly improved, and the drug effect is also easier to be absorbed by the human body. Experts pointed out that after pulverizing the gas flow crusher, the minimal component can reach the original efficacy. During the pulverization process, it can work according to different medicinal materials and crushedness, generally use a gas flow pulverizer to pulverize the drug. It is possible to save resources between 30% and 70%.

ALPA gel method White Carbon Black Turbo Grinder for Cinder Case Sharing: The main products of this customer include beer silica gels, an openings, catalyst carriers, and the like. The company purchased our AlPA Turbo Grinder for Cinder.

Technical parameters:
Finished granularity: D50: 12-16UM 10-12UM
Production capacity: 250-450kg

How to install Turbo Grinder for Cinder, the following content hopes Help you.

1, Chinese medicine shredder should be more smooth and easier to use.
2, before the traditional Chinese grinder work, clean processing materials must be selected. Hard metal, such as metal or stones, can not be mixed into the machine, so as not to damage parts or faults.
3, before the machine is opened, check whether the components of the machine are firm and reliable. Everything is normal, so you can work.
4, turn on the power supply, turn for 1-2 minutes, check whether the operation is normal, normal conditions, can put the material. When the crusher is working, the operator cannot leave. Once the sound is abnormal, the power supply should be disconnected immediately. In the new pulverizer raw material, the exit is fixed with a long bag.
5. When using the pulverizer, if the power supply voltage is too low, do not use it to avoid damage to the motor. The power supply is normal, it is not easy to damage, and the production efficiency is high.

Through the above learning, is it more understanding for maintenance Turbo Grinder for Cinder. For more information, continue to pay attention to our website.