Impact Mills for Ternary Materials

Impact Mills for TerNary Materials This product technology has been widely valued by the industry. The abrasive mechanism of Impact Mills for Ternary Materials is mainly used to determine its wide range of applications, high fine, typical materials: super hard diamond, silicon carbide, metal powder, high purity requirements: ceramic pigment, medicine, biochemistry, medicine. Impact Mills for TerNary Materials can convert an ordinary gas from the gas source portion to nitrogen, carbon dioxide, etc., is an inert gas protection device, which is suitable for use in flammable and explosive, oxidative materials, comminution, grading, and processing.

Impact Mills for Ternary Materials work is mainly, and after the material is accelerated through the nozzle, the compressed air enters the flow of the pulverization region, and the material is fluid, each particle has the same motion state. . In the pulverized region, the accelerated particles collide with each other in each nozzle. The pulverized material is delivered to the grading area through the upper gas stream, and the fine powder of the particle size is selected by the horizontally arranged grading wheel, and the coarse powder that does not reach the granularity requirement, returns to the pulverization region to continue pulverization. Put the qualified fine powder with the airflow into the high-efficiency swirl separator, and purify the dust gas by the dust collector, discharged into the atmosphere, and the entire pulverization process reaches the high requirements of environmental protection.

ALPA precipitation method White Carbon Black Impact Mills for Ternary Materials case Sharing: The customer is an Egyptian company, from our English official website to our superfine pulverized experience of white charcoal black. There are a number of cooperative customers. Through the incoming experiment and on-site visit. Determine our AlPA strength, and finally purchased the Impact Mills for Ternary Material Materials from our company.

Impact Mills for Ternary Materials has many core accessories, and these attachments are also fragile parts. Once they don't pay attention to repair, it will cause serious consequences, especially if the gas flow grinding spindle will cause downtime, and cannot estimate the output loss. The following sections describe the reasons why the airflow grinding principal beam fracture is described.

The cause of the airflow grinding main shaft is easy to damage:
1. Since the pulverizer is a long-time crushing and ground bulk ore, the mechanical impact will cause fatigue damage to the spindle, if it is operated, the surface of the spindle Will wear, if you don't pay attention, cracks are generated.
2. The air supply will pass the airflower overload. When gas flow is used, you need to feed it properly, and each machine is limited. If this is more than this, in the load operationIt is easy to damage the part, which will affect the overall service life of the airflow.
3. During mining and transportation, ore is often mixed with some waste metals. When these objects are in electromagnets at the upper portion of the belt, the electromagnet cannot beExcluding, causing these materials in ore and mud into gas flow, resulting in frequent iron, resulting in frequent impact on the spindle and other portions.
The above is the reason why the Impact Mills for Ternary Materials spindle is easily damaged.

The technology of impact mills for Ternary Materials produced by AlPa makes the structure easier to make the classifier wear resistance.Friends needed to come to us!