Vibration Mills of Polymer Powder

Vibration Mills of Polymer Powder is one of the common ultrafine pulverization methods, widely used in ultra-fine pulverization or fine pulverization of materials such as non-metallic mine, chemical, chemical, metallurgical and other industrial materials, has a fine particle size, narrow particle size distribution, The surface of the particles is smooth, the particle rules, high purity, and high activity.

The distinction between the ultrafine pulverizer and the ordinary pulverizer in the crush:
The ordinary pulverizer can only be smashed into 200 mesh, and 200 mesh is 75 microns. It is the size of the flour, and the ordinary flour is about 80 mesh 160 mes, that is, 90 to 180 microns, this is the thickness of the ordinary pulverizer to print powder.
The ultrafine pulverizer can be super micro-pulverized, can be smashed to 10,000 mesh, 10,000 mesh is 1.3μm, which is equivalent to the particles of the flour, and then pulverized into 70 copies, each size is 10,000 mesh, can It is very thin.

A Material Company is a research and development, production of products that specialize in the products of inorganic non-metal powder materials and surface treatment. , High-tech enterprises in one of sales and technology services.
The company has a series of automated production equipment and testing instruments such as fine grinding, precision grading, and surface cover to compound mixing; high purification, ultrafine, sphericalization, and Its surface coating treatment is deeply processed, whether it is a formulation optimization or a custom research and development of new products.
Case parameters
Product particle size: D50: 3-45UM
Human Yield: 3-10kg

1. Before using the pulverizer, first check whether all fasteners of the machine are tightened and the belt is fastened.
2. The spindle direction must be consistent with the direction of arrow on the shroud, otherwise it may damage the machine and cause personal injury.
3. Check if the crusher is complete.
4. Check if the gas flow pulverizer has a hard object such as metal in a crushing room, otherwise it will damage the tool, affect the machine.
5. You must check the purity of the material before crushing. Metal hard materials are not allowed to avoid damage to the tool or cause combustion.
6. The oil cup on the machine should always note the full lubricant to ensure that the machine is operating normally.
7. Stopping before stopping. If you do not continue, remove the residers from the machine.
8. Regular inspection tools and screens are damaged. If damaged, it isReplace it.
9. There will be slight vibration when using the fuselage.Be sure to tighten the cover to connect the handle to avoid accidents.

Vibration Mills of Polymer Powder has a lot of use, and I want to know more about the ultrafine gas flow classifier. Welcome to us!