Rod Pin Crusher of Carbon

Rod Pin Crusher of Carbon can be used for important or need to be grounded to granular product processing, AlPA ultrafine pulverizer products are good, affordable, factory direct sales, also push after-sales maintenance service for customers, good service attitude

Under the action of the high-speed rotary impeller, the gas pressure flowing through the impeller increases, and the high pressure airflow flows out of the impeller, the fine particles are ejected. Since the blade of the rotary vane is designed as a bending, the inlet is large, the exit cross-sectional area is small, so the airflow pressure at the outlet is reduced, the speed increases, and the rotational flow is conducive to classification.
The grading point adjustment mechanism sets three adjustment rods and keeps its synchronous motion using the chain. When the adjustment rod moves up, the fine powder increases; when the adjustment rod moves down, the fine powder is reduced. The graded point can be continuously adjusted, and the particle size of ROD PIN CRUSHER OF CARBON in performance can be adjusted. The gradular weight product can reach D97 ≤ 3 ≤ 150 microns, which is suitable for fine grading of dry micro-micro products.
The setting of the control ring is to ensure that the control ring is formed between the control ring and the radial particles ring, and the stability of the airflow flow is controlled. The residual windlet inevitably introduces excess gas from the dry material, the temperature of the classification chamber is high, and the air can expand, and therefore designed a residual tightening to maintain the stability and balance of the graded indoor airflow.



AlPa Phosphate Rod Pin Crusher of Carbon Case Sharing: The customer's main business is the production and sale of special powder for rust-proof pigments and diamond tool industries. The raw material production and processing, new products are developed in one, with a production and sales enterprise of phosphate, such as mining, smelting, powder, and new materials.
The customer needs to perform airflow grading to the iron phosphate ultrafine powder, eventually experimenting with our company's grading function to meet the customer needs.

Hour Yield: 80kg / h

How to continuity Rod Pin Crusher's life? Here are the following aspects:
1, during the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, inspection should be checked, find a reason, troubleshooting.

3, regular inspections for the lids, promptly guarantee the quality of production and production.
4, the blades and bushing should always check the wear situation. When wear, the productivity is lowered, and the grain is thick.
5, host and gradient flow bearing oil grease lubrication, dedicatedThe use of grease, and the degree of 265-295.
6, the cycle of the bearing is 2000 hours.The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease.Otherwise, the bearing temperature is too high.
7. The spiral feeder is 4,000 hours, plus ordinary calcium based grease.

If the later period is intended for superfine grade machines, precision grading machines, jet classifiers, you can directly contact us, product quality is guaranteed, fair, good service, welcome everyone to buy!