Cell Mills of Tourmaline

Cell Mills Of Tourmaline is a clean, efficient, high-level, high-yield of advanced crusher models in crushing, is very extensive, from dozens of minor tests from several hundreds of micro tests. With a few tons of large production, Cell Mills of Tourmaline is narrow by it: the particle size distribution is narrow, the average particle size is fine; the powder is good, the product is purity; suitable for low melting point, thermal drugs; good sexy, less pollution; Crushing - Mix - Dry Online Operation and other major characteristics have been widely recognized by the company.

Under the action of the high-speed rotary impeller, the gas pressure flowing through the impeller increases, and the high pressure airflow flows out of the impeller, the fine particles are ejected. Since the blade of the rotary vane is designed as a bending, the inlet is large, the exit cross-sectional area is small, so the airflow pressure at the outlet is reduced, the speed increases, and the rotational flow is conducive to classification.
The grading point adjustment mechanism sets three adjustment rods and keeps its synchronous motion using the chain. When the adjustment rod moves up, the fine powder increases; when the adjustment rod moves down, the fine powder is reduced. The graded point can be continuously adjusted, and the particle size of Cell Mills of Tourmaline in performance can be adjusted. The gradular weight product can reach D97 ≤ 3 ≤ 150 microns, which is suitable for fine grading of dry micrometer products.
The setting of the control ring is to ensure that the control ring is formed between the control ring and the radial particles ring, and the stability of the airflow flow is controlled. The residual windlet inevitably introduces excess gas from the dry material, the temperature of the classification chamber is high, and the air can expand, and therefore designed a residual tightening to maintain the stability and balance of the graded indoor airflow.


ALPA Hardstone Powder Cell Mills of Tourmaline Case Sharing:
A gypsum company is a set of gypsum mining, calcium sulfate powder research and development, production, sales, export as an integrated enterprise The company's products are widely used in building materials, molds, food, medicine, rubber, plastics, coatings and other industries.
The company adopts advanced modern production equipment and leading production technology, natural gypsum, natural plaster powder, desulfurized gypsum powder variety, high grade, quality, and export to all parts of the country, partially exported to Japan, South Korea, South Africa , Egypt and other countries are favored by users.

Product particle size: 4-15um
Hour Yield: 3-6T

Cell Mills of Tourmaline is widely used, do you know how to use it correctly? The following content hopes to help you.
1. Preparation before departure. Check the host,Whether the joints, pipelines, and valves are normal, working properly.
2, open the machine

(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops:

inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance

(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions

(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.

Shan dong alpa produces various types of crushers, can be used in various materials such as medicinal materials, ingredients, chemicals in powder, and the highest effect can reach. Our products are non-standardized products, which will customize their products according to your needs, and make a reasonable offer according to the product.