Impact Mills of Heavy Calcium

Impact Mills of Heavy Calcium This product technology has received extensive attention from the industry. The abrasive mechanism of Impact Mills of Heavy Calcium is mainly used to determine its wide range of applications, high fine, typical materials: super hard diamond, silicon carbide, metal powder, high purity requirements: ceramic pigment, medicine, biochemistry, medicine. The Impact Mills of Heavy Calcium can convert the normal gas from the gas source portion to nitrogen, carbon dioxide, etc., is an inert gas protection device, which is suitable for use in flammable and explosive, oxidative materials.

The following is a detailed description:

1. Feed particle size control

Most Impact Mills of Heavy Calcium has a certain upper limit requirement for feed particle size. After entering the pulverization cavity, it can be sufficiently accelerated before collision and crushing with other particles. It is difficult to completely accelerate after large particles enter the pulverized cavity, which will allow them to stay in the machine too long, resulting in too high energy consumption. Therefore, in large-scale production of ultrafine powder, it is an effective way to pre-ground the raw material of the particle size is an effective pathway for energy saving.
2. Working medium

At present, the working medium of Impact Mills of Heavy Calcium is mainly compressed, superheated steam, inert gas, and the like. The choice of working fluid has a certain impact on crushing effects and economics. Superheated steam is superior to air in fluidity and critical flow rates to achieve higher flow rates and uniform flow fields. However, using superheated steam as a working fluid, it must be ensured that it is still in an overheating state before entering the product capture device, otherwise the material is condensed.
3. Feeding speed

Feeding speed is an important parameter reflecting gas flow grinding production capacity. During the pulverization process, the optimum ratio of the intake flow rate and the feed speed is the key to improving the crushing efficiency. In general, under certain intake flow conditions, the feed speed is proportional to the particle size of the product. However, the feeding speed is too fast, which will increase the particle density, mutual interference, disadvantage of the particles, and difficult to achieve the sufficient and effective collision between particles, affect the crushing effect; although the feed speed is too slow, the particles stay in the crush area The time can be extended, which will reduce the particle density, reduce the collision rate, resulting in a decrease in production capacity and an increase in unit production energy consumption.
4. Granular limit

Impact Mills of Heavy CalciumDuring the pulverization, as the material particle size is reduced, the crystallization and strength of the material increases. After reaching a certain degree, the particle size of the material is no longer reduced or reduced, that is, the crushing limit of the material is reached. At this time, the material specific surface area increases, the surface activity of the particles, the particle agglomeration and grinding are in a dynamic equilibrium state, even if the grinding time is prolonged, it is difficult to further reduce the particle size of the material.


AlPa Feni50 Impact Mills of Heavy Calcium case Sharing:
A technology company is the main business, serving the emerging industry, in powder materials and products, magnetic materials and products , Welding materials and articles, filtration materials, etc. We continue to innovate around our customers, and work with partners. We are committed to providing competitive solutions and services for advanced metal materials, product programs, and other functional applications to create value for customers. Products have been sold to several countries and regions, and are recognized by many well-known companies and customers at home and abroad.
Case parameters:
Hour Yield: 300kg

The privacy of the useful life and quality of Impact Mills of Heavy Calcium has the following points:
1. Material properties.
In general, the pulverizer can accommodate all brittle materials, but due to the different material properties, the pulverization performance is also different. Due to the intensity, density, hardness, viscosity, shape and electrical performance of different materials, inevitable The difference in crushing effect is caused, wherein the strength of the material is an important factor, while the material that is too high can also result in a decrease in the life of the gas flow grinding.
2. Use time.

I want to know friends with other crusher industry knowledge can also log in to the website. If you are interested in our Impact Mills of Heavy Calcium, please feel free to contact us.