Hammer Mills of Potassium Sorbate

Modern production not only pursues production and finished product quality, but also develops toward environmental protection. Especially in the comminution industry, the overall development trend of Hammer Mills of Potassium Sorbate technology in my country is to stably develop, highly controllability, high quality and other stable development.

Generally, the high-speed airflow accelerated pulverized solid particles have the following three ways:

(1) Airflow particles accelerate nozzle: After the airflow and the particles are mixed, the particles can be obtained. Very high speed (almost the same speed of airflow speed), but the material wears in the nozzle in the nozzle, rarely used in practical applications.
(2) Syringe Acceleration Particles: High Speed \u200b\u200b(Ultrasonic Speed) airflow and particles mix accelerate in the mixing tube, the particles obtain a higher speed, but the material is severe to the mixing tube.
(3) Free airflow acceleration particles: particles enter the high-speed airflow in the form of freely drop, only the high-speed air flow is passed through the nozzle and the wear is small.




ALPA potassium permanganate Hammer Mills of Potassium Sorbate case Sharing: This customer is mainly engaged in the development of high energy chemical energy development. The study needs a device that can make ultraf fine pulverized in high potassium permanganate. Finally, we bought a Hammer Mills of Potassium Sorbate in our AlPa.

finished particle size:
100-325 目
Production capacity: 5kg

Hammer Mills of Potassium Sorbate's daily maintenance is a very important part, Here is the maintenance method of Hammer Mills of Potassium Sorbate.
1. When the machine starts or starts, the appropriate amount of grease should be applied to ensure its life.

3, regularly check the reliability of the equipment, prevent accidents or accidents.
4, the direction of operation of the spindle should be correct. If it is incorrect, it should be handled in time to avoid damage to the machine.
5, equipment maintenance should be carried out by professional and technical personnel, and others must not be carried out to avoid damage to the equipment.
6, electrical components and lines should be checked regularly, whether it is intact, pick upWhether it is reliable.
7. The equipment should be cleaned in time to prevent the next use to avoid contaminating materials.

For more consultation, please continue to pay attention to us, or inquire.