Turbo Mills for aluminum-based salt

With the continuous increase in social needs, Turbo Mills for aluminum-based salt continues to improve in the use of performance, finished product quality, service life, etc. A wide range of applications in many areas such as chemical, food, pesticides, cosmetics, dyes, coatings, and electrons.

Turbo Mills for aluminum-based Salt temperature increases, when the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titanium powder is pulverized by superheated steam, the vapor pressure is usually 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after pulverized surface can be lower.

A silicon micron powder is a manufacturer of silicon micropowder production, and the company has strong technical strength, advanced Detecting instruments, perfect pre-sales, sale and after-sales service, can provide high-quality crystalline silicon powder, high-purely molten silicon powder, high white ultra-fine silicon powder, etc. The company is committed to providing advantageous solutions and services for other functional applications such as electronic materials, special ceramics.
The company continues to innovate around customers, and has always adhered to customer-centric, quickly responding to customer needs, and tailor-made quality products for customers, and continues to create long-lasting value for customers to achieve customers
case parameters:
Product particle size: 300kg

Turbo Mills for aluminum-based Salt Bearing parts bearing maintenance is prone to fail, wear wear in use, therefore requires regular maintenance, Frequently refuel to increase the life of the bearings. The impact crusher is maintained daily to ensure that the crushing equipment is in good technical state, and can be operated at any time, shorten the residence time, improve the integrity of the crusher, reduce the wear, and extend the life of the crusher; Maintenance, mandatory, correct processing, maintenance and repair is not allowed to be used alone.

I want to know more product knowledge and continue to pay attention to our website. If you need to buy Turbo Mills forAluminum-based salt, please feel free to contact us.