Vibration Grinder for Zeolite

Vibration Grinder for Zeolite as a crushing main equipment, the role is also growing, in the industrial sector of metallurgy, mine, chemical, cement, requires a large number of raw materials and reuse waste every year. The classifier is processed. In the coking plant, sintering plants, ceramics factories, glass industries, powder metallurgy, etc., need to break the raw materials to the particle size required for the next job. In the chemical, power sector, the hierarchy, the raw material is broken, grind, increase the surface area of \u200b\u200bthe material, has created favorable conditions to shorten the chemical reaction of the material.

Vibration Grinder for Zeolite is installed in a place where the site is flat.

Before working, it is necessary to pick up the processing material, no metal, stone, etc., the hard substances are mixed into the machine, so as not to damage the parts or failures in the machine. Check that each component is firm and reliable before booting. Everything is normal, you can work on the power, idle for 1-2 minutes, check whether the operation is normal, everything is normal, it can be pushed.
When operating, the operator cannot leave. Once the sound is abnormal, the power should be disconnected immediately.

When machining raw new friends Chinese medicine crusher, the discharge opening should be tied to the bag. When the pulverizer is in use, if you encounter the power supply voltage, do not use it, so as not to damage the motor. When the power supply voltage is normal, the machine is not easily damaged, and the production efficiency is high.

ALPA seaweed feed Vibration Grinder for Zeolite case Sharing: The company is a seafarer enterprise in Yantai. It is found to be smashing the seaweed during breeding. After smashing, it can be used as a feed to the feed of feed purchase. . By comparing a long-term use of a Vibration Grinder for Zeolite, you may save the cost of this production line for several years. The company purchased our AlPa's Vibration Grinder for Zeolite.

Technical parameters:
finished particle size: D90: 400 目
Production capacity: 400kg / h

In general, there are some sounds in operation. When Vibration Grinder for Zeolite is pulverizing the raw material, there will be broken sounds, which is normal. However, if the sound turns a noise, if the sound becomes too loud, it will become a problem. So how do I solve the phenomenon of excessive noise? Let's take a look at it.

1. Add a lubricating oil on the rotating part, and adjust the bearing if the bearing and the shaft are; if the bearing wear is resistant, the bearing will be replaced.
2. In the pulverization processgenerates noise.The cooling sleeve is dispensed in the crushing chamber, which can be used to reduce the temperature.
3. Install the muffler on the fireplace of the pulverizer.
4. Damping equipment, such as using damping boards.

The equipment market is rapidly changed. At present, the airflow classifier has certain needs in the market, but the society is constantly evolving, no matter what industry needs to keep pace with the times, they can lead the industry..