Rod Pin Grinder for Fish Bone

Everyone knows that choosing a product or service, to understand from all aspects of the milling machine, service, quality, etc.

In the process of production, Rod Pin Grinder for Fish Bone mainly utilizes compressed air through the freezing, filtration, and drying, the nozzle inside the device forms a supersonic air flow. After a powerful pressure rotation into the grinding chamber, the material to be pulverized in the grinding chamber exhibits a fluidized form.

ALPA lithium iron phosphate Rod Pin Grinder for Fish Bone case sharing: This customer is expanding in the production process, through comparison discovers that the performance of our ALPA's lithium iron phosphate is no longer more than other powders at home and abroad. The same type of equipment in physical equipment is poor, and even in some aspects there are unique advantages. After experimenting, the company purchased Rod Pin Grinder for Fish Bone.
Technical parameters:
finished particle size: D50: 3μm
Production capacity: 400kg

Let's learn with Xiaobian to learn Rod Pin Grinder for Fish Bone inspection steps .
Rod Pin Grinder for Fish Bone is an ultrastructure of dry material ultrafine pulverized equipment in the form of air separation, heavy polishing, shear. It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. The material enters the cylindrical pulverizing chamber through the feed port, and is crushed along the grinding rail, and the crush is achieved. The pulverized material passes out the pulverizer through the negative pressure air flow caused by the fan, and the material collection system is entered, filtered through the filter bag, the air is discharged, the material, the dust is collected, and the pulverization is completed.

A disc airflow pulverizer first carefully checks whether there is damage in the transportation in the transportation, then put the high machine and the auxiliary electrical control unit in place, and then turn on the pipeline of the main aircraft, each When equipped with a tube, the \"iron anchor 609\" is used to protect the \"iron anchor 609\" to ensure the sealing of the pipe, and each single machine and pipe are connected to the ground wire and grounded to avoid dust explosion caused by electrostatic sparks. Before each stand-alone trial operation, check whether there is a metal item in the machine, if there is an exclusion. Whether the bolt is firm and the tightness of the belt, the reliability of the shield, and the like. After five minutes of empty bus, the operator should carefully observe the various instruments on the control cabinet, and they can be pushed. After the feed, the current is not allowed to exceed the rated value of 32.6A, otherwise it should be subtracted to ensure that the normal operation of the discharge is fixed. The stepless shift handle of the classifier can change the speed of the hierarchy, and achieve the excellent adjustment of the product. If the particle size of the product is required, it can improve the transferSpeed, vice versa to reduce the speed, become large particle size particles.

The above is that the user receives the normal acceptance operation process after receiving the ROD PIN Grinder for Fish Bone product. You can try to identify the use.