Rotor Mills for Rubber Chemicals

Everyone knows that choosing a product or service, to understand from all aspects of the milling machine, service, quality, etc.

How do I solve if the dust is too big?

1. Install the dust collector: Generally, this dust collector can now be used with a crusher. It puts dust income trapping bag, dust is filtered by the dust box;

2, cloth bag dustproof: cloth bag is tightly pulled with machine, prevent leakage drain. Attention should be paid attention to parking, and the dust should be cleaned in time.
3, woodllar or pool dust removal: mainly using the ventilator to vacuum to the crushing, then vacuum, or vacuum through the pool.

The above three dust removal methods can achieve a good dust removal effect, and can solve the problem of excessive dust, which is generally installed before working to prevent excessive dust.


ALPA Phenolic Resin Rotor Mills for Rubber Chemicals Case Sharing: The company has a manufacturer of phenolic resin in its customers. The company has found a lot of powder equipment companies. Suitable equipment. Finally, we found our AlPa, after the incoming experiment, our company's product Rotor Mills for Rubber Chemicals.
Technical parameters:
Finished particle size: D50 less than 5μm

After long-term use, it is necessary to clean Rotor Mills for Rubber Chemicals. Before the airflow pulverizer is cleaned, all machines should be disassembled. When cleaning, the power supply can be turned off, and the remaining dust can be removed directly with a brush. We must remember to clean it layer by layer. When the displacement is unloading, you can remove the four screws on the base, then remove the hopper. When sieved, the air pulverizer door can be opened directly, and finally the screen can be disassembled. After removing the movement gear, release the fastening nut first, then separate the live teeth from the spindle. Then remove the active gear and place it safely. Remove the fixed gear, remove the screw and remove the fixed gear. Be careful when disassembling the air pulverizer and must never be damaged by machine components.

If there is related requirements, please call us!