Rotor Crusher of Ceramsite Sand

Rotor Crusher's Ceramsite Sand As the name refer to a mechanical equipment used in the production area, which is mostly used in pulverizing particles, fast pulverity, good accuracy.

Rotor Crusher of Ceramsite Sand should be in the venue Flat use of convenient place installation.

Before working, it is necessary to pick up the processing material, no metal, stone, etc., the hard substances are mixed into the machine, so as not to damage the parts or failures in the machine. Check that each component is firm and reliable before booting. Everything is normal, you can work on the power, idle for 1-2 minutes, check whether the operation is normal, everything is normal, it can be pushed.
When operating, the operator cannot leave. Once the sound is abnormal, the power should be disconnected immediately.

When machining raw new friends Chinese medicine crusher, the discharge opening should be tied to the bag. When the pulverizer is in use, if you encounter the power supply voltage, do not use it, so as not to damage the motor. When the power supply voltage is normal, the machine is not easily damaged, and the production efficiency is high.

A material company is a professional research and development, production, sales and sales of special products such as inorganic non-metal powder materials and surface treatment. High-tech enterprises in technology services.
The company has a series of automated production equipment and testing instruments such as fine grinding, precision grading, and surface cover to compound mixing; high purification, ultrafine, sphericalization, and Its surface coating treatment is deeply processed, whether it is a formulation optimization or a custom research and development of new products.
Case parameters
Product particle size: D50: 3-45UM
Hour yield: 3-10kg

1. Ensure the pulverizer The quality of the grinding dish is not harmful: the real-time monitoring system is carried out on the rolled grinding disc, and the harm of the grinding disc is immediately observed.
2. The grease oil does not meet the regulations: Analysis of the grease on time on time, ensuring that the grease oil exceeds the remarks.
3. The refrigeration system does not have a cooling effect: the cooling tower of the intake system is used to use a water cooler to use the continuous liquidity cooling circulating water to grease the heat production. When driving, when driving, touch the cooling tower with hand The oil pipe, the temperature difference is small, almost not, can be seen that the single cooling tower effect is not obvious, the heat exchange time of the cooling circulating water and the grease is too short, and the cooling tower is connected in series, and the cooling tower is refrigerated. Extend heat exchange time.

ALPA also believes in the future airflowTechnology will become better and better, users who need to purchase such products can contact us.