2021-11-30 17:38:17
Impact Mill Machine of Oil Fracturing Proppant As a clean, efficient, high-level, high-yield of advanced crusher models in the pulverization of Western medicine producers, the use of a few grams of micro Test tests have a large production of hundreds of tons, and the gas flow mill is narrow by it: the particle size distribution is narrow, the average particle size is fine; the powder has good shape, the product is purity; suitable for low melting point, thermal drug; sealed, pollution Less; easy to operate; crushing - mixed - dry online operations, etc. have been widely recognized by the company.
Impact Mill Machine of Oil Fracturing PropPant is based on the size of the particle size, the specific gravity is different, and the settlement speed is different from the principle of the settling speed in the gas. The classifier, cyclone separator, dust collector, and the introducer make a set of hierarchical systems. Under the action of fan pulleys, the material is moved at a high speed, and the up airflow into the grading area. Under the action of the powerful centrifugal force generated by the high-speed rotation grading turbine, the coarse, fine particles are separated, and the fine particles that meet the particle size requirements by the gap of the grading wheel blades or the dust collector are collected. After the crude particles are partially fine particles, the velocity along the wall to the secondary air is disappeared and reduced.
The strong washing effect of the secondary wind, the thick particles are separated, and the fine particles rise to the secondary level of the secondary level, and the crude particles reduce the discharge port.
ALPA Slag IMPACT MILL MACHINE OF Oil Fracturing Proppant case share: This customer is Xi'an Steel Slag Application Technology Co., Ltd., mainly engaged in the reuse of steel slag. During the production process, steel slag ultrafine powder is required, screening the required steel slag micropowder, the customer investigates many domestic powder equipment manufacturers, and finally chose our ALPA vertical air classifier.
Product particle size: D97: 5-75μm
Hour Yield: 200-500kg
Impact Mill Machine of Oil Fracturing Proppant is widely used, do you know how to use it correctly? ? The following content hopes to help you.
2, open the machine
(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.
(2) From zero, gradually adjust to the specified speed.
(3) Open the fan, spinWind separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops:
inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance
(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions
(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
ALPA is a professional powder airflow mill manufacturer, complete model, quality assurance, high quality, sell well, easy to operate, powder airflow mill, welcome new and old customers to consult!
