Turbo Mill for Metal Anode Material

Turbo Mill for Metal Anode Material can be said to be important in the industrial production process at this stage, AlPA has been committed to the development and application of equipment such as grading machines for many years, and we have produced during many years of development. The classifier has gradually begun to develop in the direction of modernization, and we believe that we can provide a complete set of production planning programs in a large range.

Turbo Mill for Metal Anode Material, the working process is mainly, after the material is accelerated into supersonic flow through the nozzle, the compressed air enters the flow of the crushing area, and the material is fluidized, and each particle has the same movement. state. In the pulverized region, the accelerated particles collide with each other in each nozzle. The pulverized material is delivered to the grading area through the upper gas stream, and the fine powder of the particle size is selected by the horizontally arranged grading wheel, and the coarse powder that does not reach the granularity requirement, returns to the pulverization region to continue pulverization. Put the qualified fine powder with the airflow into the high-efficiency swirl separator, and purify the dust gas by the dust collector, discharged into the atmosphere, and the entire pulverization process reaches the high requirements of environmental protection.

A new energy company is a high-tech enterprise focusing on high performance lithium battery materials. The main business areas of the company involves the research and development of battery materials. Development and technology transfer of production and sales and battery technology.
The company is based on the development of lithium battery materials and technology. The company adheres to the innovation of science and technology, leading the future concept, and grows forward to new energy technology companies with core competitiveness.
Case parameters:
Product particle size: go to 3 um fine powder
Human Yield: 150kg

1, Ultrafish Crush The machine and power unit should be installed firmly. If the ultrafine pulverizer is fixed, it should be fixed on the cement; if the pulverizer is a mobile operation, the unit should be installed on the base made of angle iron, and ensure the power machine (diesel or electric motor) and the pulverizer The belt wheel groove is in the same turning plane.
2, after the pulverizer is installed, check the fastening of the fasteners of each part, if there is loose to tighten. At the same time, check if the leather belt looseness is appropriate.
3 Whether the power machine and the pulverizing machine are lubricated.
4, do not casually replace the pulley, to prevent the transition chamber to create explosion, or speedToo low affecting the working efficiency of the pulverizer.
5
6. At any time, you should pay attention to the operation of the pulverizer, and the feed should be evenly charged to prevent blocking, do not have a long time overload.If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.

With the above learning, it is more understandable for maintaining Turbo Mill for Metal Anode Material.For more information, continue to pay attention to our website.