Impact Mill Machine of Corn Starch

Impact Mill Machine Of Corn Starch can be used for important or need to be grounded to granular product processing, AlPA ultrafine pulverizer products are good, affordable, factory direct sales, also push after-sales service service for customers, service attitude

Impact Mill Machine of Corn Starch should be installed in a place where the site is flat.

Before working, it is necessary to pick up the processing material, no metal, stone, etc., the hard substances are mixed into the machine, so as not to damage the parts or failures in the machine. Check that each component is firm and reliable before booting. Everything is normal, you can work on the power, idle for 1-2 minutes, check whether the operation is normal, everything is normal, it can be pushed.
When operating, the operator cannot leave. Once the sound is abnormal, the power should be disconnected immediately.

When machining raw new friends Chinese medicine crusher, the discharge opening should be tied to the bag. When the pulverizer is in use, if you encounter the power supply voltage, do not use it, so as not to damage the motor. When the power supply voltage is normal, the machine is not easily damaged, and the production efficiency is high.

ALPA Organic Pigment Impact Mill Machine of Corn Starch Sharing: The company is a Taiwan chemical raw material enterprise. In 19 years, the company purchased a mechanical grinder for pulverizing organic pigments from our AlPa.

Technical parameters:
Finished particle size: D50 less than 325 mesh
Production capacity: 300kg

Any mechanical equipment, there is a certain preventive measures before use, must Check the precautions to operate, reduce the damage rate to the low, so what preventive measures do Impact Mill Machine of Corn STARCH?

1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
2, lubrication should be carried out in accordance with the requirements to make the machine operating properly.
3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.
4, foreign matter should not be treated in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss. 6. If damage should be replaced immediately, certain components should be checked.

Welcome everyone to continue to pay attention to our website to learn more!