Rod Pin Mill Machine Of DesulFurizer

With the demand of society, the demand for ROD PIN MILL MACHINE OF DesulFurizer is increasing, and the requirements for fineness, purity and pass rate are increasing. In the current market, there is a great development space.

The components of ROD PIN MILL MACHINE OF DesulFurizer include drive motors, pulveration wheels, fine powder and coarse powder outlets, raw materials inlets and two air imports. In addition, it is widely used and is a very good machine. Vertical air pulverizer can be used in squares, crystalline stone, quartz, gypsum, silica, corundum, cement, alumina, etc., which plays an important role.

ALPA Organic Pigment Rod Pin Mill Machine of DesulFurizer Sharing: The company is a Taiwan chemical raw material enterprise. In 19 years, the company purchased a mechanical grinding machine for pulverizing organic pigments from our ALPA.

Technical parameters:
finished particle size: D50 less than 325 mesh
Production capacity: 300kg

Blocking the fault solution for Rod Pin Mill Machine Of DesulFurizer, Xiaoxie talking Inspect, I hope to have some reference roles. Crushes blockage is the most common fault of machinery.

It may be one of the most common failures in mechanical design, but because improper operation can cause many faults.
(1) The feeding speed is too fast, the load is increased, causing clogging. During aquaculture, pay attention to the deflection angle of the current table pointer at any time. If the rated current is exceeded, the motor overload and long-term overload will burn the motor. This should be reduced or closed immediately, but it can also be controlled by increasing the feed speed to control the feed speed. Because the speed is fast, the load is large, the load fluctuates great. Therefore, the current of the rolling mill is generally controlled around 85% of the rated current.
(2) The unloading tube is inserted or the interference is too fast, and the universal crusher is blocked, and the delivery device does not match, resulting in weakening or calm of drainage tube. In order to find faults, we must first clarify the export transport equipment, do not change, adjust the amount of feed, and the normal operation of the equipment.
(3) The water content, aging, screening, crushing and sealing material of the hammer hammer are too high, and the general grinding will be blocked. It is necessary to regularly update the working status of the hammer aging and the serious aging, and check the screen regularly. Improve the production efficiency of universal grinding machines, improve the reliability of non-blocking and grinding.
Shandong Alpa is a 20-year experience manufacturing company with ROD PIN MILL MACHINE OF Desulfurizer equipment, has a number of patents, welcome to inquire!