Pin Pulverizer for Powder Coating

In this economically booming area, there are many people who know Pin Pulverizer for Powder Coating, crusher technology is in a leading position in the same industry.

High temperature PIN PULRIZER for Powder Coating performance characteristics:
1, the content classification device, the product particle size D97: 8-150 microns can be adjusted, the particle shape is good, the particle size distribution is narrow.
2, can be used in series with the classification machine, and produce a plurality of particle size sections 1 time.
3, equipment disassembly and packing is convenient, and the inner wall is smooth and no dead angle.
4, the whole system is closed, the dust is small, the noise is low, and the production process is clean and environmentally friendly.
5, the control system uses program control and easy to operate.

ALPA Crystalline Sulfur PIN Pulverizer for Powder Coating Case Sharing: Shenyang needs an apparatus capable of ultrafine pulverization of crystalline sulfur. Crystalline sulfur is a flammable and explosive raw material, so there is a very high demand of the explosion-proof system of the pulverized apparatus. After many examinations, our company's nitrogen protective PIN Pulverizer for Powder Coating met the production needs of the company. PIN Pulverizer for Powder Coating has an advantage in terms of security, production capacity, energy consumption.
Technical parameters:
Finished granularity: 200-300 目
Production capacity: 1.5T

For PIN Pulverizer for Powder Coating blocking troubleshooting, Xiaoxi talking Inspect, I hope to have some reference roles. Crushes blockage is the most common fault of machinery.
It may be one of the most common failures in mechanical design, but because improper operation can cause many faults.
(1) The feeding speed is too fast, the load is increased, causing clogging. During aquaculture, pay attention to the deflection angle of the current table pointer at any time. If the rated current is exceeded, the motor overload and long-term overload will burn the motor. This should be reduced or closed immediately, but it can also be controlled by increasing the feed speed to control the feed speed. Because the speed is fast, the load is large, the load fluctuates great. Therefore, the current of the rolling mill is generally controlled around 85% of the rated current.
(2) The unloading tube is inserted or the interference is too fast, and the universal crusher is blocked, and the delivery device does not match, resulting in weakening or calm of drainage tube. In order to find faults, we must first clarify the export transport equipment, do not change, adjust the amount of feed, and the normal operation of the equipment.
(3) The water content, aging, screening, broken and sealing material of the hammer hammer is too high, and the general researchThe mill is blocked.It is necessary to regularly update the working status of the hammer aging and the serious aging, and check the screen regularly.Improve the production efficiency of universal grinding machines, improve the reliability of non-blocking and grinding.

The above is the PIN Pulverizer for Powder Coating Related Content, which is provided by Shan Dong ALPA.The company has consistently follows the management of the standard, puts the quality in the first production and service policy, providing customers with confidence and a weighing crusher product and services.