2021-12-14 08:58:33
In a rapid development of rapid development, many people have a certain understanding of the Vibration Pulverizer for Methyl Cellulose ether, and crusher technology is in an absolute leader in the industry.
Vibration Pulverizer for Methyl Cellulose ether is very widely used in industrial production, usually used to smash the added value of larger materials, after ultrafine crushing, generally the application of materials, value, value Higher, being loved by the industry.
AlPa Trimage Material Vibration Pulverizer for Methyl Cellulose Ether Case Sharing: The company requires a three-dimensional material ultrafine pulverizer, and our AlPa's Vibration Pulverizer for Methyl Cellulose ether is also more well-known in the industry. There is a lot of proportion in the industry. Through experiment, the company purchased a Vibration Pulverizer for Methyl Cellulose ether of our company.
Technical parameters:
finished product particle size: D50: 10μm
Production capacity: 5-10kg / h
For Vibration Pulverizer for Methyl Cellulose ether blocking troubleshooting, Xiaoxie talking Inspect, I hope to have some reference roles. Crushes blockage is the most common fault of machinery.
It may be one of the most common failures in mechanical design, but because improper operation can cause many faults.
(1) The feeding speed is too fast, the load is increased, causing clogging. During aquaculture, pay attention to the deflection angle of the current table pointer at any time. If the rated current is exceeded, the motor overload and long-term overload will burn the motor. This should be reduced or closed immediately, but it can also be controlled by increasing the feed speed to control the feed speed. Because the speed is fast, the load is large, the load fluctuates great. Therefore, the current of the rolling mill is generally controlled around 85% of the rated current.
(2) The unloading tube is inserted or the interference is too fast, and the universal crusher is blocked, and the delivery device does not match, resulting in weakening or calm of drainage tube. In order to find faults, we must first clarify the export transport equipment, do not change, adjust the amount of feed, and the normal operation of the equipment.
(3) The water content, aging, screening, crushing and sealing material of the hammer hammer are too high, and the general grinding will be blocked. It is necessary to regularly update the working status of the hammer aging and the serious aging, and check the screen regularly. Improve the production efficiency of universal grinding machines, improve the reliability of non-blocking and grinding.
The above is the Vibration Pulverizer for Methyl Cellulose ether, you can make a brief understanding, you need to purchase eddy current pulverizer, disc air crusher, users of ultrafine crusher products please contact us
