Cell Mill Machine for Old Battery

With the development of society, the application of Cell Mill Machine for Old Battery has become more large.

Cell Mill Machine for Old Battery operates in compressed air, gas or high pressure overheating steam. Cell Mill Machine for Old Battery has no movable parts, thus eliminating contamination caused by contact with external grinding media. It is also an ideal process for grinding thermal and waxy materials because wear heat is not produced. Cell Mill Machine for Old Battery is used for fluid energy. Micronization and grading are carried out in a shallow cylindrical chamber. The high pressure air or steam is injected into the chamber by a specially designed nozzle placed on a peripheral wall.

ALPA Desulfurizer Cell Mill Mill Machine for Old Battery Case Sharing: The company is a high-tech company that requires a desulfurizer crushing machine, investigating a number of powder equipment manufacturers at home and abroad, and finally chose our alpa Cell Mill Machine for Old Battery.

Technical parameters:
finished particle size: 200 mesh 90% pass
production capacity: 4-5T

Let's learn with Xiaobian to learn Cell Mill Machine for Old Battery inspection steps.

Cell Mill Machine for Old Battery is an ultra-fine pulverized device that utilizes air separation, heavy polishing, shear. It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. The material enters the cylindrical pulverizing chamber through the feed port, and is crushed along the grinding rail, and the crush is achieved. The pulverized material passes out the pulverizer through the negative pressure air flow caused by the fan, and the material collection system is entered, filtered through the filter bag, the air is discharged, the material, the dust is collected, and the pulverization is completed.

A disc airflow pulverizer first carefully checks whether there is damage in the transportation in the transportation, then put the high machine and the auxiliary electrical control unit in place, and then turn on the pipeline of the main aircraft, each When equipped with a tube, the \"iron anchor 609\" is used to protect the \"iron anchor 609\" to ensure the sealing of the pipe, and each single machine and pipe are connected to the ground wire and grounded to avoid dust explosion caused by electrostatic sparks. Before each stand-alone trial operation, check whether there is a metal item in the machine, if there is an exclusion. Whether the bolt is firm and the tightness of the belt, the reliability of the shield, and the like. After five minutes of empty car, the operator should carefully observe the various instruments on the control cabinet, and when the electric current is stable.It can be pushed.After the feed, the current is not allowed to exceed the rated value of 32.6A, otherwise it should be subtracted to ensure that the normal operation of the discharge is fixed.The stepless shift handle of the classifier can change the speed of the hierarchy, and achieve the excellent adjustment of the product.If the product particle size is required, the speed can be improved, and the rotational speed is reduced, and large particle size particles can be reduced.

The above is the normal acceptance operation process after receiving the Cell Mill Machine for Old Battery product. You can try to use it

ALPA powder is committed to ultrafine powder and grading equipmentR \u0026 D, production and sales, support according to demand, the equipment model is complete, the quality is reliable, the efficiency is high, low energy consumption, easy to operate, reasonable price, 24 hours can consult!