2021-12-17 10:11:25
Impact Pulverizer of tar is a very practical and convenient industrial crushing equipment, most chemical industries, polymer materials need to be used, the AlPa crusher is smudged, the granules are delicate, and the price is affordable.
Impact Pulverizer Of Tar Apply to the ultrafine pulverization of the material. After the material is extracted, the properties of the powder will have a large change in the properties of the powder, and it appears to be high viscosity after being affected. Powder is extremely prone to aggregation in the feed opening, pulverizing cavity and exhaust pipe, requires special treatment processes and specific design.
Shan dong alpa design and developed materials were significantly effective in the crushing of materials.
Impact Pulverizer Of TAR Compressed Gases The high-speed jets generated by the feed nozzle The material particles in the bucket are introduced into the disc shocking chamber 3, and there are several jet nozzles around the pulverizing chamber. The high-speed fluid is injected, and the ultra-high-speed swirl rotation is generated in the pulverization chamber. The coarse particles in the opposite ultra-high-speed swirls in the superiospantial cyclone generate hit and friction in the intersection, and the particles were quickly pulverized.
When the particles are pulverized to the pulverizing particle size below the pulverized particle size, the centrifugal force of the particle movement is reduced, and the pulverization is separated from the center of the center, and is collected from the center outlet. Such a pulverizer, the motion of the particles can be decomposed into two components in both directions. In one direction, the direction of movement of the particles is substantially consistent, and there is no significant impact pulverizing effect, and only in the other direction, the particles are opposite, and the particles produce effective impact.
Therefore, this impact of the intersection is limited, and the energy of ultra-high-speed moving particles is not fully utilized, so the production energy consumption is still high.
ALPA Quartz Powder Impact Pulverizer Of Tar Case Sharing:
A new material company is a high-tech enterprise engaged in electronic grade silicon fine powder production and development. The company has a number of silicon micron powder production lines, annual production of crystalline silicon fine powder, molten silicon fine powder, surface treatment silicon fine powder and other specifications. The company has always adhered to customer-centric, luxuriant needs to respond quickly and continuous innovation, and is committed to becoming a supplier of leading powder materials applications in the industry.
We continue to innovate around our customers, and work with partners. We are committed to providing competitive solutions and services for electronic materials, electrical insulation materials, special ceramics, precision castings, paint coatings, and other functional applications to create value for customers.
Product particle size: D97: 5-75UM
Hour Yield: 20-100kg
Let's talk about how to make it correctlyMethods for Impact Pulverizer of Tar
1. Prepare before booting the host, attachment machines, pipes, and valves, whether it is intact, whether it can work properly.
1. Turn on the compressor power supply, the pressure valve and the main valve of the dust collector, then turn on the power switch of the powder machine, and turn on the power.
2. From the zero start grading wheel and gradually adjust to the specified speed.
3. Several turning wind turbines, cyclone separators discharge, dust removal, feed motor power, and then turn on the total power supply of the tube bar, set the inverter frequency, and then begins to break.
4. The particle size of the finished wheel can be adjusted by grading wheel frequencies and charging.
Third, the order of shutdown is: inverter - feeder - Main valve - Compressor - Stepper wheel Motor - Cyclone discharge, dust removal switch - Fan - Total Power - Air Compressor.
4, repair
1. The motor should be lubed regularly, but the grease should not be too large, the bearing temperature is too high.
2. Hierarchical impeller, spiral feeder, crushing nozzle wear should pay attention to check, belt tight and suitable.
3. After a crushing material, after a certain period of time, it is necessary to remove the viscosity of the chalk, so as not to block, thereby affecting the crushing effect.
4. After the filter bag, you should clean or replace it.
V. Note
1. When the discharge device is running, the unloading port cannot be extended to avoid accidents.
2. The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric machine are damaged.
3. Regularly check the safety valve to ensure safety.
The above is a matter of use of the Impact Pulverizer of Tar, and those who want to know about other crushers can pay more attention to us!
