2021-12-23 10:08:08
PIN Pulverizer for chemical Salt can be said to be important in the use of the industrial production process at this stage, and AlPA has been committed to the research and development and application of grade machines for many years. The classification machine has gradually begun to develop in the direction of modernization, and we believe that we can provide a complete set of production planning programs to our customers in a large range.
The distinction between the ultrafine pulverizer and the ordinary pulverizer in the crush:
The ordinary pulverizer can only be smashed into 200 mesh, and 200 mesh is 75 microns. It is the size of the flour, and the ordinary flour is about 80 mesh 160 mes, that is, 90 to 180 microns, this is the thickness of the ordinary pulverizer to print powder.
The ultrafine pulverizer can be super micro-pulverized, can be smashed to 10,000 mesh, 10,000 mesh is 1.3μm, which is equivalent to the particles of the flour, and then pulverized into 70 copies, each size is 10,000 mesh, can It is very thin.
AlpA Cerium Pin Pulverizer for Chemical Salt Case Sharing: This customer is a research institute in a well-known university in China. It is necessary to ultrafish crushing of cerium oxide during the study. Pin Pulverizer for Chemical Salt in our alpa.
Cerium oxide mechanical milling machine technical parameters:
finished particle size: 200-2000 mesh
Production capacity: 10-30kg
As a crusher, Shandong AlPa has been working to customers Provide greater value, the fineness, production capacity, and installation venues of each project are important information for custom selection, pre-sales service, 24-hour online customer service to answer questions, provide ideal communket production line solutions And accordingly, it provides the factory quotation to increase the escort for the cerium oxide crushing project.
Any machine device must pay attention to it before use, you must pay attention to use, operation, make it damaged to the lowest, then what should you pay attention to before using the PIN Pulverizer for Chemical Salt?
1, before use, check if all fasteners are fastened and whether the direction of operation of the spindle is correct, so as not to damage the machine.
2, lubrication should be performed as required to ensure the normal operation of the machine.
3, before adding the material to the pulverizer, it is not mixed to avoid damage to the grinding machine.
4, whether foreign matter or impurities, if it should be disposed in time to avoid damage to the tool.
5. If there is any abnormality in the use of the crusher, immediatelyTreatment to avoid more loss.
6, some parts should be checked regularly.If it is damaged, it should be replaced immediately.
Shan Dong Alpa is committed to the Pin Pulverizer for chemical salt, has a mature process process, has a high-energy technology R \u0026 D team, specializing in the development of crusher, survive by quality, welcome everyone to consult.
