Cell Pulverizer of Culture Medium

Today's industrial requirements have significantly improved, and thinner powder is conducive to the deep processing of the product, thus makes the product more value. The Cell Pulverizer of Culture Medium can effectively improve the extent of the material, and greatly improve the productivity. Cell Pulverizer of Culture Medium has received much attention, and the prospect has also been optimistic about many people.

Cell Pulverizer of Culture Medium works in work is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.

ALPA Light Burning Magnesium Cell Pulverizer Of Culture Medium Case Sharing: This customer is a device company, focusing on cement, mine, chemical, electric power, metallurgy, etc., mainly engaged in rough grinding in these industries. Equipment, the customer needs a more suitable airflow classification equipment for its customers, and has been used to select our ALPA air classifier. Buy two devices. Product particle size: D80: 15μm hour yield: two 15t / h.
Our AlPA classifier can support ball mills, vertical grinding, Raymond mill, mechanical mill, etc., welcome customers to visit, incompetent experiments.

In order to let everyone have a further understanding of Cell Pulverizer of Culture Medium, the following simply analyze common problems and how to solve these problems.
1, ask: How to choose equipment in the face of materials that need to be smashed?
A: (1) Moh's hardness is less than 3. The mechanical grinding machine and hierarchical impact mill can meet the crushing requirements, saving a certain cost. (2) High hardness, high purity material is higher than 3.5 hardness. (3) If it is a metal powder, you can atomize the grading and cannot be broken.
2, ask: The custom pulverizer can be used in different materials. What is the difference between them?
A: (1) After the food and drugs are crushing, they need to meet the level of food safety, the best choice for stainless steel materials, because in the mirrorExternal polishing, no iron pollution.(2) Broken material is easy to worn, and the purity is required to be high after crushing, and the stainless steel is optimal.(3) If the crushing requirements are not high, cost savings, the air pulverizer of carbon steel material can be used.
3, ask: When using a gas flow crusher, the fineness of the finished product does not reach the standard, how to adjust the classification wheel is not used?
A: (1) If the new custom pulverizer does not meet the requirements of the granularity, the device can be incorrect.
Therefore, in order to avoid such errors, it is best to perform material crushing and grading experiments before purchase, and carefully check whether the experimental results are satisfactory.

Cell Pulverizer of Culture Medium has a lot of use, and I want to know more about the ultra-fine gas flow classifier, welcome to consult with us!