Rotor Pulverizer with DesulFurizer

With the development of the times, the progress of society, the development of the market is elegant, and more and more manufacturing have to accelerate innovation, some transformations, some continue to improve the technical level of the product, to adapt to the development of the market, Meet the customer's picky requirements. In the case of continuous changes in the market, only constantly innovation, continuously improve your technical level, and constantly improve your own products, in order to make the airflow classifier industry have a broader development space.

Rotor Pulverizer With DesulFurizer has a wide range of smudged, simple and convenient, but during the pulverization process, there is often a case where the crushing effect is different.

The crushing effect is mainly affected by the following factors:

The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverization aid. The gas-solid ratio of the pulverizer in crush is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. But if the gas is too high, not only will waste energy, but will even degrade the dispersion performance of certain pigments.

When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 to 200 mesh when pulverizing calcination; the material after pulverizing surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh.
So, should you choose how high pressure when crushing? Those skilled, this is mainly dependent on the comminutability and fineness requirements of the material.
ALPA Composite Powder Rotor Pulverizer With DesulFurizer Case Sharing: This customer is a renewable resource company, which requires a different granular selection of composite powder to select a super fine powder less than 30 μm. Investigate a number of domestic grading equipment manufacturers, did not find the right equipment, and finally found the right equipment in our AlPa, and selected our vertical grading machine equipment. Product particle size: D97 ≤ 30μm hour yield: 80T

In general, there are some sounds in the operation. Rotor Pulverizer with DesulFurizer will definitely have broken sounds when crushing the raw material, which is normal. However, if the sound turns a noise, if the sound becomes too loud, it will become a problem. So how do I solve the phenomenon of excessive noise? Let's take a look at it.

2. There will be noise during the pulverization process. The cooling sleeve is dispensed in the crushing chamber, which can be used to reduce the temperature.
3. In crushingInstall the muffler on the fireplace in the room.
4. Damping equipment, such as using damping boards.

The Shan Dong Alpa is a scientific and technological private enterprise that produces a variety of airflow pulverities, integrating development, manufacturing, and application.The main product model has airflow pulverizer, airflow mill, pharmaceutical gas flow pulverizer, disc air pulverizer, eddy current pulverizer.