Rod Pin Grinder with Crystalline Sorbitol

With the demand of society and life, the demand for Rod Pin Grinder With Crystalline Sorbitol is getting bigger and higher in the industry. In the current market, there is a great development space.

Rod Pin Grinder With Crystalline Sorbitol Transformed into a high pressure air flow of pulverization kinetic energy into a crushing cavity peripheral gas storage, airflow distribution station, airflow through the Ravar nozzle accelerated ultrasonic speed air flow into the crushing room The material and the inquiry nozzle enters the crushing chamber to synchronize acceleration grinding.
Since the flow cycle of the jet of the crushing chamber and the animal feed, the particles and the particles and the fixed target wall hit, collide, friction, and grind. The fine particles were opened into the center of the pulverizer, and the cyclone separator was entered at the drive of the heart flow, and the coarse powder was thrown into the periphery of the pulverizing chamber, and cycled under the action of centrifugation and continued to be pulverized.

Welcome to the majority of major manufacturers with Xixia stone graded demand to the factory, and collective experiments.

1, newly installed equipment, inevitably residual iron blocks, welding outlets, Solder and other foreign matter. In the absence of the fan and the main motor, open the implicit baffles under the feed port, allowing impurities and washing materials to be discharged from here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems.
2, before checking everything is normal, the power-on starting the device, check the direction of rotation of all motors.
3. Parameter inspection setting for the two inverters of the ultrafine pulverizer's feed motor and the graded wheel motor, check if the air open, contactor, heat relay, overcurrent relay adjustment is appropriate? Return all lines all over again.
4, check whether the solenoid valve is blown normally, regulate the dust collector solenoid pulse width and blow interval.
5. Check if the cleaning of the cleaners under the brake dragon has a leakage, can be placed in the interface with the hand or fine powder, there is a feeling of suction, if there is a sealing treatment. After all of the above tests are normal, prepare the material production.

Shandong AlPa is a 20-year airflow pulverizer researchAfter years of production, after years of precipitation and accumulation, experienced, with multiple patented technology.In the years, the airflow mill has been provided for domestic and foreign customers, there will be tens of thousands of equipment, often have a customer to order our products again, enough to explain the reputation of the Shandong AlPa airflow mill.Welcome to inquire!