2022-01-04 16:19:09
Many friends who want to produce industrialized are certainly unfamiliar with Cell Grinder with adhesive. Cell Grinder with adhesive has a very convenient, crushing speed, crushing product quality, and is a very useful crushing machine.
The component of Cell Grinder with Adhesive includes drive motors, pulverations, fine powder and coarse powder outlets, raw materials inlets and two air imports. In addition, it is widely used and is a very good machine. Vertical air pulverizer can be used in squares, crystalline stone, quartz, gypsum, silica, corundum, cement, alumina, etc., which plays an important role.
ALPA Kaolin Cell Grinder with adhesive case sharing: The customer is a Kaolin Powder company in India. The customer needs a grading equipment to select the Kaolin soil ultrafine powder, and some companies have not found appropriate. of. Finally, our AlPA meets the customer needs for the classifier equipment provided. The set of equipment has reached 4T per hour.
Cell Grinder with adhesive vibration reasons and solutions can be carried out from the following aspects:
1, the hammer installation error in the maintenance assembly. When the hammer is turned off, in order to prevent the weight of the rotor from losing balance, all the hammers in the pulverizer must be turned out together, otherwise it will have a strong vibration in the operation.
2, the difference between the weight of the two sets of hammer exceeds 5 grams. The method of excluding is to adjust the weight of the hammer, so that the difference between the two sets of weight is less than 5 grams.
3, individual hammer card is too tight, there is no open in operation. After the stop, turn the observation with hand and find a way to turn the hammer flexible.
4, other parts of the rotor are unbalanced, and the adjustment balance needs to be carefully checked.
5, the spindle bending deformation. The solution is to school straight or replacement.
6, the bearing gap exceeds damage. It is generally used to solve the problem.
7. The bottom angle fixing nut is not fixed in a fixed or running. The solution is tightening.
The Cell Grinder with Adhesive produced by our company can not only separate from 20-2μm from the ordinary powder, but also directly with mechanical crushing equipment, forming a closed circuit, improving pulverizing Efficiency, and can prevent high temperature in the cavity to cause adhesion, glue, glue, causing operations, and at the same time, the classifier has also received a wide range of users, and friends needed to contact us!
