Cell Crusher with MSG

Cell Crusher With MSG is well balanced, only need to be produced in a smooth floor, and low noise, which can avoid dust leakage during the pulverization process, which is favored by the powder industry.

Cell Crusher with MSG institution reasonable, stable operation, low energy consumption, large crushing capacity, small size, no malfunction, convenient cleaning and maintenance. Typically, the outer casing uses water-cooled and self-produced air volume, transporting a powder material, low temperature rise, and the thermal material can be pulverized. The blade wear is reduced by using a large number of ultrasonic vortices generated by the back surface of the blade and the high frequency pressure. Compact, no dust overflow.

ALPA lysis carbon black Cell Crusher with MSG case sharing: The company is a renewable energy application company in Inner Mongolia, when the company recovers the waste tire, it is necessary to use ultrafine pulverized equipment to lyvon Black performs ultrafine pulverization. After many incidents, our AlPa Cell Crusher with MSG was selected.

Technical parameters:

Finished granularity: D90: 500 目
Production capacity: 2T


Let's talk about Cell Crusher With MSG's common troubleshooting.

Cell Crusher with MSG Troubleshooting:

1, feed back irrigation: Improper tunnel adjustment, pipeline blockage, screen blocked, dust bag gas permeability or severe wear, hammer surface wear is serious, etc. Cause the feed back. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathability, or replace the hammer head.
2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and spindle, balance the rotor and adjust the belt, the bearing can return to normal state.
3, the strong vibration of the airflow pulverizer: The mounting hammer is wrong. The corresponding weight deviation of the two groups of heavy hammers is too large, the bearing is damaged or the spindle is bent, and the foot is connected to the screw. According to the specific reason, step by step.
4, there is a sound inside the crusher: the part of the crusher is damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, and the machine should stop replacing damaged components or remove hard objects.
5, low production efficiency: insufficient electric power power, misconduct, belt slip, severe hammer wear, raw material unevenness or high raw material moisture content is the main reason for the low production efficiency.
We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves equipment efficiency.

To learn more about Cell CRUsher With MSG knowledge, please pay attention to the Shan Dong AlPA website, the company is trustworthy by the company's research and production of crusher and other products, quality, and is trustworthy.