Pin Crusher with Electronic Ceramics

PIN CRUSHER WITH ELECTRONIC CERAMICS is a mechanical equipment applied to the production area, which is mostly used in pulverizing particles, fast pulverity, good precision.

Pin Crusher with electronic Ceramics's pulverization particle size A wide range of operations, simple operation, but during the pulverization process, there is often a case where the crushing effect is different.

The crushing effect is mainly affected by the following factors:

The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverization aid. The gas-solid ratio of the pulverizer in crush is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. But if the gas is too high, not only will waste energy, but will even degrade the dispersion performance of certain pigments.

When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 to 200 mesh when pulverizing calcination; the material after pulverizing surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh.
So, should you choose how high pressure when crushing? Those skilled, this is mainly dependent on the comminutability and fineness requirements of the material.
ALPA carbonate PIN CRUSHER WITH ELECTRONIC CERAMICS Case Sharing:

A lithium industry company is an extraction of a new energy high-tech enterprise for the preparation of lithium battery positive electrode raw materials - battery grade carbonate. The main product of sodium sulfate, battery-grade carbonate, and other products of industrial grade carbonate. The company has passed the certification of the Quality Management System, \"Environmental Management System\", ISO50001 \"Energy Management System\".

Case parameters:
Product particle size: D50: 5.5μm
Hour Yield: 900kg

Installation, operation and maintenance is three important factors using Pin Crusher With Electronic Ceramics. The wear and consumption of each operation has always been a key factor in each startup operation. In order to use the airflow pulverizer for a long time, please adjust the open mode. Boot is a standard, for the first time to contact and use this kind of equipment, it is always a very strange state. In fact, it is very simple, the best way is to familiarize yourself with the consumer content on the instructions or have no use value. Timely specification and familiar. After each startup, check the airflow pulverizer in time to develop good usage habits. In the future, we don't need to pay attention to and familiarize.

The airflow pulverizer has improved and improved from the design and component combination, gave us a lot of help. It is good, but it is also declining long-term not maintenance and maintenance..Check the operating components, electrical components, and transmission.Once an abnormality occurs, please repair it in time, without a fault, gas mill, prevent accidents.

The equipment market is rapidly changing. At present, the airflow classifier has certain needs in the market, but the society is constantly evolving, no matter what industry needs to keep up with the times, it can lead the industry.