Cell Mills for Magnesium Hydroxide

Most of the product production and processing in the current stage use Cell Mills for MAGNESIUM HYDROXIDE for the product of the product is a very common way of processing, accompanied by the continuous improvement of scientific productivity, the technology of grading equipment It is also imminent to replace. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.

In the production process of breaking using Cell Mills for Magnesium Hydroire, the ultrasonic air flow generated by the device can constantly collisions between the materials, and this supersonic airflow can also produce raw materials. A very good impact, and then the material can also have a good crushing effect with the inner wall of the equipment.

ALPA Desulfurization Agent Cell Mills for Magnesium Hydroxide Case Sharing: The company is a high-tech company that requires a desulfurizer crusher, investigating a number of powder equipment manufacturers at home and abroad, and finally chose our alpa Cell Mills for Magnesium Hydroxide.
Technical parameters:
Finished granularity: 200 mesh 90% passed
Production capacity: 4-5T

Cell Mills for Magnesium Hydroxide is widely used, you know how to use it correctly NS? The following content hopes to help you.
1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly.
2, open the machine

(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops:

inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance

(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid blocking.Plug, thus affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions

(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.

Shan dong alpa is a world-renowned particle and powder processing system provider. If you want to consult, you can get the answer you want by asking Shandong Alpa to get the answer you want, but it is not just a device.Price, there may be powder technology solutions in your industry, welcome to call us.