Pin Mills of Aluminum Powder

Pin Mills of Aluminum Powder plays a vital role in the current industrial production. In major minerals, chemical industry, pharmaceutical industry, and food manufacturing industries are widely used. With the continuous development of Pin Mills of Aluminum Powder, the various industries, especially medical, and the food industry has put forward new purity in the pulverization process. Requirements, it is desirable that the powder can be kept clean. In traditional PIN MILLS OE Aluminum Powder, carbon steel, stainless steel is generally used as a lining material for Pin Mills of Aluminum Powder.

PIN MILLS OF Aluminum Powder has a wide range of pulverized granularity, simple and convenient, but during the pulverization process, there is often a case where the crushing effect is different.

The crushing effect is mainly affected by the following factors:

The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverization aid. The gas-solid ratio of the pulverizer in crush is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. But if the gas is too high, not only will waste energy, but will even degrade the dispersion performance of certain pigments.

When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 to 200 mesh when pulverizing calcination; the material after pulverizing surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh.
So, should you choose how high pressure when crushing? Those skilled, this is mainly dependent on the comminutability and fineness requirements of the material.
ALPA Graphite PIN MILLS OF Aluminum Power Case Sharing: This customer is a research institution, in its research, the graphite needs to be superfined. Through multiple incoming experiments, our AlPa's Pin Mills of Aluminum Powder was selected.

Finished granularity: D50: 10-30μm
Production capacity: 30-50kg


Further understanding for Pin Mills of Aluminum Powder, below Simple analysis of common problems in the crusher and how to solve these problems.

A: (1) Moh's hardness is less than 3. The mechanical grinding machine and hierarchical impact mill can meet the crushing requirements, saving a certain cost. (2) High hardness, high purity materialsMoh's hardness is higher than 3.5 hardness. (3) If it is a metal powder, you can atomize the grading and cannot be broken.
2, ask: The custom pulverizer can be used in different materials. What is the difference between them?

A: (1) After the food and drug is crushing, it is necessary to meet the level of food safety, the best choice for stainless steel materials, because the mirror is polished inside and outside, does not produce iron pollution. (2) Broken material is easy to worn, and the purity is required to be high after crushing, and the stainless steel is optimal. (3) If the crushing requirements are not high, cost savings, the air pulverizer of carbon steel material can be used.
3, ask: When using a gas flow crusher, the fineness of the finished product does not reach the standard, how to adjust the classification wheel is not used?
A: (1) If the new custom pulverizer does not meet the requirements of the granularity, the device can be incorrect.
Therefore, in order to avoid such errors, it is best to perform material crushing and grading experiments before purchase, and carefully check whether the experimental results are satisfactory.
Shandong Alpa supplies a variety of PIN MILLS OF Aluminum Powder. If you need to buy Pin Mills Of Aluminum Powder, please feel free to contact us.