Rod Pin Mill for Silicon Dioxide

In many crushing methods, Rod Pin Mill for Silicon Dioxide has become one of the most mainstream pulverization techniques with a small particle size, narrow particle size distribution, high purity, high particulate activity, and good dispersibility. Especially suitable for crushing drugs such as contaminated materials.

Many manufacturers who want to make a crushing process will choose to buy a Rod Pin Mill for Silicon Dioxide, but not all crushers can apply production, erroneous processing methods will make the pulverizing velocity quick. The mill is wear is too fast, and the inner cavity of the pulverizer of the material should be selected when the material hardness is too large.

The device operates for a long time in a higher crushing pressure, which requires uniformity of cyclical replacement losses.
The product after the crushing products are generally single peaks. If there is a double-peak or multimodal main reason, the pulverization pressure is unstable. The solution is based on the gas supply of gas source equipment to meet the amount of gas required for work, ensuring that the lowest gas supply pressure of the gas is high than the working pressure.
The feed speed is unstable. Solution to check if there is a blockage at the feed valve; the material is not very viscous, uniform liquidity, and the stable control feed speed. A filter cake is formed in the pulverizer chamber. The solution is suspended, and the filter cakes in the crushed chamber will then return to the production.

Alpa Steel slag ROD PIN MILL for Silicon Dioxide case share: This customer is a steel slag application Technology Co., Ltd., mainly engaged in the reuse of steel slag. During the production process, steel slag ultrafine powder is required, screening the required steel slag micropowder, the customer investigates many domestic powder equipment manufacturers, and finally chose our ALPA vertical air classifier.

Case parameters:
Product particle size: D97: 5-75μm
Hour Yield: 200-500KG

Super Rod Pin Mill for Silicon Dioxide Machine Maintenance and Staff:

1. Frequently inspect the fastening of each component, prevent it from slipping off, damaging the machine.
2, each oil injection hole should be refueling, and the bearing portion is cleaned every half year to fill the lithium-based grease.
3
4, when the machine is deactivated, the external debris should be cleared, and the grease is filled with all the rotating parts, stored in the storage of air drying, non-corrosive gas.

Weifang ALPA well-known gas flow crushing equipment brand, free professional transport plan, German advanced process, stable performance, high efficiency of airflow, support customization !!! [1twenty three]