Turbo Mills of Peel

In the classification operation of industrial production at this stage, the use of Turbo Mills of PEEL is mainly targeted for the effective crushing of solid particles, and is also a commonly used comminution equipment in the ultrafine pulverization process.

Turbo Mills of PEEL will rise in the working fluid, when the temperature of the working fluid is too high, the flow rate of the gas increases. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titanium powder is pulverized by superheated steam, the vapor pressure is usually 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after pulverized surface can be lower.

A material company is a professional research and development, production, sales and technology of products that engage in inorganic non-metallic powder materials and surface treatment. High-tech enterprises that serve in a service.
The company has a series of automated production equipment and testing instruments such as fine grinding, precision grading, and surface cover to compound mixing; high purification, ultrafine, sphericalization, and Its surface coating treatment is deeply processed, whether it is a formulation optimization or a custom research and development of new products.
Case parameters
Product particle size: D50: 3-45UM
Hour Yield: 3-10kg

2, if you want to change the precision classifier, or if you want to repair, you must be in the case of power failure.
3, usually pay attention to lubrication and maintenance of the bearing of the classifier.
4. If the precision classifier works for 1,500 hours, remember to add lubricant.