Rotor Mills of Synthetic MICA

With the continuous development of pulverizer technology, Rotor Mills of Synthetic MICA has gradually penetrated into people's daily lives.

Generally, the high-speed airflow accelerated pulverized solid particles have the following three ways:

(1) Airflow particles accelerate nozzle: After the airflow and the particles are mixed, the particles can be obtained. Very high speed (almost the same speed of airflow speed), but the material wears in the nozzle in the nozzle, rarely used in practical applications.
(2) Syringe Acceleration Particles: High Speed \u200b\u200b(Ultrasonic Speed) airflow and particles mix accelerate in the mixing tube, the particles obtain a higher speed, but the material is severe to the mixing tube.
(3) Free airflow acceleration particles: particles enter the high-speed airflow in the form of freely drop, only the high-speed air flow is passed through the nozzle and the wear is small.


ALPA Battery Powder Rotor Mills of Synthetic MICA Case Sharing:
A Industrial Company's main business scope is: new energy storage materials, electronic ceramic materials technology and industries, secondary resources Regeneration New Technology and Industry, Biological Engineering and Organic Polymer Materials, Electronic Products and Network Products Technical Development, Technical Transfer, Technical Training, Products and Related Materials and Equipment after Manufacturing, Sales and Development; International Technical Cooperation and Trade, Technical talent training; business of import and export business of mechanical equipment, spare parts, raw ciliary materials and technologies required to operate the company's self-produced products and technologies and the import and export business of mechanical equipment, spare parts, original auxiliary materials and technology.
Case parameters:

Hour Yield: 800kg

What should I pay attention to? Before running, the operator needs to confirm the feed pipe Whether there is foreign matter at the entrance and exit. Whether there is any raw material at the exit. If the foreign matter is found to handle a clean and then boot.
When the grading machine is operating normally, in order to maintain the stability of the grading, the pressure of the supply tube compressed gas is required to be monitored. Check if the dust collector pressure loss of the laboratory classifier is stable.
Decompose, cleaning, inspected, and maintaining the laboratory classifier must be disconnected to avoid danger.

If you have the situation about other crushers, you want to know, welcome to consult!