Impact Grinder for Ferrite Magnetic Powder

Environmentally-friendly Impact Grinder for Ferrite Magnetic Powder has gradually become the market leading to mechanical equipment. At this stage, the modern new mechanical equipment in the machining and manufacturing industry has gradually replaced traditional rough mechanical processing and production. Production has become a new leading leading to the implementation of technological innovation upgrades at this stage.

Impact Grinder for Ferrite Magnetic Powder institution is reasonable, stable, low energy consumption, large crushing capacity, small size, no malfunction, and convenient cleaning and maintenance. Typically, the outer casing uses water-cooled and self-produced air volume, transporting a powder material, low temperature rise, and the thermal material can be pulverized. The blade wear is reduced by using a large number of ultrasonic vortices generated by the back surface of the blade and the high frequency pressure. Compact, no dust overflow.

ALPA Baked Wheat Impact Grinder for Ferrite Magnetic Powder case Share: This customer is a seasoning company, in the production process, it is necessary to use a device that can make ultrafine pulverized wheat after baking. . Investigate a number of domestic enterprises in China, and finally chose our ALPA as a partner, purchased the Impact Grinder for Ferrite MagneTic Powder from us.

Technical parameters:
Finished granularity: D99.9: 180 mesh
Production capacity: 400kg

Ultrafa Impact Grinder for Ferrite Magnetic Powder uses air separation, heavy polishing, shear The form of ultrafine pulverized equipment in the form of dry materials is widely used in various industries. Let's take a brief introduction to its daily maintenance content.

1, when the bearing oil is high, it is necessary to stop checking the cause of the fault and removal immediately.
2, easy to wear parts should pay attention to the degree of wear, pay attention to and do the preparation for replacement of parts.
3, for the top surface of the chassis of the active device, it is necessary to remove dust and other debris avoiding the machine that cannot be broken, the active bearing cannot move on the chassis, causing an accident.
4, all loads of the machine are bearings, so good lubrication and bearings have a large relationship, it can directly affect the service life of the machine and the operating rate, so the amount of lubricating oil required to be injected should be reached. Good seal.
5, the sleeper installed is easy to loosen, and it must be checked frequently.
6. Note that the operation of each part of the machine is normal.
7. Turn the gear during operationIf there is an impactful sound, park check, and remove the fault.

The company has consistently follows the standard management, puts quality in the first production and service policy, providing customers with confidence and weighing airflow crusher products and services.