Turbo Pulverizer for Astragalus Powder

Turbo Pulverizer for Astragalus Powder is a very practical and convenient industrial crushing equipment, most chemical industries, polymer materials need to be used, the AlPa crusher is smudged, the granules are delicate, affordable.

Turbo Pulverizer for Astragalus Powder should be installed in a place where the site is flat.

Before working, it is necessary to pick up the processing material, no metal, stone, etc., the hard substances are mixed into the machine, so as not to damage the parts or failures in the machine. Check that each component is firm and reliable before booting. Everything is normal, the side can turn on the power, idle for 1-2 minutes, check whether the operation is normal, everything is normal, it can be pushed.
When operating, the operator cannot leave. Once the sound is abnormal, the power should be disconnected immediately.

When machining raw new friends Chinese medicine crusher, the discharge opening should be tied to the bag. When the pulverizer is in use, if you encounter the power supply voltage, do not use it, so as not to damage the motor. When the power supply voltage is normal, the machine is not easily damaged, and the production efficiency is high.
ALPA Pigments Turbo Pulverizer for Astragalus Powder case share: This customer needs to use the pigment ultrafine pulverized equipment during its production process. Through the ultrafine pulverization of the pigment to improve the product's quality, after many other types of equipment, we have chosen our AlPa Turbo Pulverizer for Astragalus Powder. Compared with the same type of equipment, our company's product reliability is higher, the pulverized particle size is more uniform, and the particle size after pulverization is narrow, and there will be no too much particle size range.

finished particle size: D90: 13μm;
Production capacity: 130kg / h


If you want to make a changing machine play a big performance during work, then Maintenance can not work, how to maintain a graded machine?

2, if you want to change the precision classifier, or if you want to repair, you must be in the case of power failure.
3, usually pay attention to lubrication and maintenance of the bearing of the classifier.
4. If the precision classifier works for 1,500 hours, remember to add lubricant.

The Turbo Pulverizer for Astragalus Powder produced by AlPa is a high quality device, supports according to demand, the equipment model is complete, the efficiency is high, the low energy consumption, easy to operate, 24 hours can consult!