Cell Pulverizer for Oyster Shell

Cell Pulverizer for Oyster Shell is better, only need to be produced in a smooth ground place, and low noise, which can avoid dust leakage during the pulverization process, favored by the powder industry.

The Cell Pulverizer for Oyster Shell has a wide range of smudged, simple and convenient, but during the pulverization process, there is often a case where the crushing effect is different.

The crushing effect is mainly affected by the following factors:

The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverization aid. The gas-solid ratio of the pulverizer in crush is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. But if the gas is too high, not only will waste energy, but will even degrade the dispersion performance of certain pigments.

When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 to 200 mesh when pulverizing calcination; the material after pulverizing surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh.
So, should you choose how high pressure when crushing? Those skilled, this is mainly dependent on the comminutability and fineness requirements of the material.

Technical parameters
finished fineness: D50: 3μm
Production capacity: 2-20kg / h

Device is booting For detailed inspection of connectivity, sealing and line, etc., all instead of no problem before running the powder classifier.
The boot should be operated in the boot order. 3 minutes before shutdown should be stopped, then shut down, the order is opposite to the boot order.
The amount of feed should be determined according to the size of the powder grading machine load, ensuring that the host is in the state of rated load. The particle fineness can be adjusted to adapt to the grading requirements.
Debutors such as the heat-sensitive material, then the power of the main motor is slightly lower than the rated power. The size of the air volume in the delivery line can be achieved by adjusting the damper of the fan.
The equipment market is a rapidly changing. At present, the Cell Pulverizer for Oyster Shell has certain needs in the market.However, the society is constantly evolving, no matter what industry needs to keep up with the times, it can lead the industry.