Cell Mill Machine for Cellulose acetate

Cell Mill Machine for Cellulose acetate is good, only need to be produced in a smooth floor, and low noise, which can avoid dust leakage during the pulverization process, which is favored by the powder industry.

Many manufacturers who want to make a crushing process will choose to purchase a Cell Mill Machine for Cellulose acetate, but not all crushers can apply production, erroneous processing methods will make pulverizing velocity quick. The mill is wear is too fast, and the inner cavity of the pulverizer of the material should be selected when the material hardness is too large.

The device operates for a long time in a higher crushing pressure, which requires uniformity of cyclical replacement losses.
The product after the crushing products are generally single peaks. If there is a double-peak or multimodal main reason, the pulverization pressure is unstable. The solution is based on the gas supply of gas source equipment to meet the amount of gas required for work, ensuring that the lowest gas supply pressure of the gas is high than the working pressure.
The feed speed is unstable. Solution to check if there is a blockage at the feed valve; the material is not very viscous, uniform liquidity, and the stable control feed speed. A filter cake is formed in the pulverizer chamber. The solution is suspended, and the filter cakes in the crushed chamber will then return to the production.
ALPA Cells Cell Mill Machine for Cellulose Acetate Case Sharing: Yantai Epintet Shares, the company needs to purchase ultrafine pulverized equipment for pulverizing gelatin. Through multi-examination and incoming experiment, the company purchased our AlPa Cell Mill Machine for Cellulose Acetate as its pectin ultrafine pulverized equipment.

Finished granularity: 60-200 目
Production capacity: 300kg


In order to have a further understanding of Cell Mill Machine for Cellulose Acetate, the following simple analysis Crusher common problems and how to solve these problems.

A: (1) Moh's hardness is less than 3. The mechanical grinding machine and hierarchical impact mill can meet the crushing requirements, saving a certain cost. (2) High hardness, high purity material is higher than 3.5 hardness. (3) If it is a metal powder, you can atomize the grading and cannot be broken.
2, ask: The custom pulverizer can be used in different materials. What is the difference between them?
A: (1) After the food and drugs are crushing, food safety water needsThe best choice for flat and stainless steel materials is polished inside and outside the mirror, and there is no iron pollution.(2) Broken material is easy to worn, and the purity is required to be high after crushing, and the stainless steel is optimal.(3) If the crushing requirements are not high, cost savings, the air pulverizer of carbon steel material can be used.
3, ask: When using a gas flow crusher, the fineness of the finished product does not reach the standard, how to adjust the classification wheel is not used?
A: (1) If the new custom pulverizer does not meet the requirements of the granularity, the device can be incorrect.
Therefore, in order to avoid such errors, it is best to perform material crushing and grading experiments before purchase, and carefully check whether the experimental results are satisfactory.

In addition to Cell Mill Machine for Cellulose Acetate, AlPa Technology Co., Ltd. also supplies powder classifiers, ultra-fine classifiers, precision classifiers, ultrafine airflow grading machines, jet grading machines, etc. Welcome to choosePurchase!