2021-12-08 10:50:32
Rotor Pulverizer Of WormWood is well balanced, only need to be produced in a smooth floor, and low noise, which can avoid dust leakage during the pulverization process, which is favored by the powder industry.
The crushing product is in addition to the particle size, and the particle size distribution is narrow, the particle name is smooth, the particle shape is high, and the high activity is high, the dispersibility is good.
ALPA lithium iron phosphate Rotor Pulverizer of Wormwood case Sharing: This customer is expanding in the production process, by comparing the performance of our ALPA's lithium iron phosphate's special crusher is no longer better than domestic and foreign powder equipment. The same type of equipment is poor, even in some aspects there is a unique advantage. After experimenting, the company purchased Rotor Pulverizer of Wormwood.
Technical parameters:
Finished granularity: D50: 3μm
Production capacity: 400kg
Super-rotor Pulverizer Of Wormwood debugging before debugging:
1, new installation Equipment, it is inevitably residually residual iron blocks, welding heads, welding slag, and other foreign matter. In the absence of the fan and the main motor, open the implicit baffles under the feed port, allowing impurities and washing materials to be discharged from here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems.
2, before checking everything is normal, the power-on starting the device, check the direction of rotation of all motors.
3. Parameter inspection setting for the two inverters of the ultrafine pulverizer's feed motor and the graded wheel motor, check if the air open, contactor, heat relay, overcurrent relay adjustment is appropriate? Return all lines all over again.
4, check whether the solenoid valve is blown normally, regulate the dust collector solenoid pulse width and blow interval.
5. Check if the cleaning of the cleaners under the brake dragon has a leakage, can be placed in the interface with the hand or fine powder, there is a feeling of suction, if there is a sealing treatment. After all of the above tests are normal, prepare the material production.
Rotor Pulverizer Of Wormwood has a lot of normal use specification, I want to know more about the ultrafine gas flow classifier, welcome to consult with us!
